Chevrolet 2012 Corvette Owner's Manual page 70

Hide thumbs Also See for 2012 Corvette:
Table of Contents

Advertisement

3-6
Seats and Restraints
This feature is turned on or off using
the vehicle personalization menu.
See Auto Memory Recall under
Vehicle Personalization on
page 5 55 for more information.
To stop recall movement, press one
of the power seat controls, power
mirror or memory buttons, or the
telescopic steering column switch.
If something has blocked the driver
seat while recalling a memory
position, the recall may stop.
Remove the obstruction; then press
and hold the appropriate manual
control for the memory item that is
not recalling for two seconds. Try
recalling the memory position again
by pressing the appropriate memory
button. If the memory position is still
not recalling, see your dealer for
service.
Easy Exit Driver Seat
This feature can move the seat
rearward and the telescopic steering
column, if equipped, out of the way
to allow extra room to exit the
vehicle.
(Easy Exit Driver Seat):
Press to save and recall the easy
exit seat position.
To save into memory:
1. Recall the desired driving
position by pressing 1.
2. Adjust the seat and the
telescopic steering column to
the desired exit position.
3. Press and hold
until
two beeps sound.
4. Repeat for a second driver
position using 2.
To recall, press and release
The vehicle must be in P (Park) for
an automatic transmission or the
parking brake must be set for a
manual transmission. A single beep
sounds. The seat and telescopic
steering column will move to the
position previously stored for the
identified driver.
If the easy exit seat feature is
programmed on in the vehicle
personalization menu, automatic
recall occurs when one of the
following conditions is met:
The vehicle is turned off, in
Retained Accessory
Power (RAP) or accessory
mode, and the driver door is
opened.
The vehicle is turned off, or in
RAP, and the unlock button on
the RKE transmitter is pressed.
If something has blocked the driver
seat while recalling the exit position,
.
the recall may stop. Remove the
obstruction; then press and hold the
power seat control rearward for
two seconds. Try recalling the exit
position again. If the exit position is
still not recalling, see your dealer
for service.
See Auto Exit Recall under Vehicle
Personalization on page 5 55 for
more information.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents