Elinchrom BX 250Ri Operation Manual page 13

Charge Ready Beep Features
This feature creates a melody if settings are different between each unit to improve the acoustical
recognition that all the flashes have fired and recycled.
Charge Ready Beep Setup
• Setting
- Press "Audio" button, less than 0.5 seconds to switch the Charge Ready Beep (ON / OFF)
• LED Indication
- Charge Ready Beep LED is on: Audio is active
- Charge Ready Beep LED is off: Audio is inactive (Mute)
• Changing Charge Ready Beep -On-Time Setting
- Press Audio button for more than 2 seconds until the display shows "A.X"
("X" is the value from 1 up to 7)
- Use the Flash-Power" up and down button to change the value settings
- The display switches back to normal mode after approx. 4 seconds if no button was
pressed. The settings are automatically stored.
- Standard setting is: "A.3"
Value A
Beep-On-Time in m/seconds
1 2 3 4
70 140 210 280 350
5 6 7
420 490
English
12