NETGEAR DGN1000 Quick Start Manual page 5

Wireless-n router

Hide thumbs Also See for DGN1000:

Table of Contents

Step 2 - Connect Splitter (ADSL connections only)

Connect the supplied splitter directly to the telephone wall socket.

Step 3 - Connect Router

Connect the supplied grey telephone cable from the splitter's ADSL

port to the grey ADSL port on the router.

Step 4 - Connect Your Home Telephone (if you have one)

Connect your telephone to the phone port on the splitter.

Step 5 - Connect PC

Connect the supplied yellow Ethernet cable from the router's yellow

LAN port to your computer's Ethernet port.

Step 6 - Connect Power

Connect the power adapter to the router then plug it into an electrical

outlet. Press the black power button at the back of the router.

Step 7 - Check Installation

If the power is connected correctly, the POWER LED will light up.

If the grey telephone cable and the splitter are connected

correctly, the ADSL LED will flash and after a few seconds turn

solid green.

Since the router is pre-configured the INTERNET LED will turn

green after a few seconds.

If the yellow Ethernet cable is connected correctly, the

corresponding ETHERNET (LAN) LED will light up.

Once you have confirmed the above, open your web browser

(e.g. Internet Explorer, Google Chrome, Firefox or Safari) and go to

your favourite website.

Congratulations, you are now connected to the Internet.

Table of Contents