Sony Trinitron KV-29DRC420 Service Manual page 18

DGC LEAD WIRE DRESSING (ALL EXCEPT KV-29DRC420)
STEP1:
Make a loop in leads
and route loop BEHIND
The DGC Coil.
STEP 2:
Thread both connector
housings through the
loop in lead wires.
STEP 3:
Plug in connector
housings into the
[AY] Board using the
loop to take up slack.
DGC WIRE DRESSING (KV-27HS420 ONLY)
DGC Restraining Cable
Wrapped around DGC THREE times
(upper and lower)
Cable Tie
4-041-041-02
KV-27HS420/29DRC420/30HS420/32HS420/34HS420/36HS420
Cable Tie
4-041-041-02
DY
DGC CLIPS (29RSN)
p/n: 4-062-970-12
DGC Restraining Cable
1-900-804-27
clipped to inside hooks
on CRT Plate.
DY
Rotation
COIL Cable Tie
4-041-041-02
DGC Restraining Cable
1-900-804-27
clipped to inside hooks
on CRT plate.
CRT BRKT
KV-27HS420/29DRC420/30HS420/32HS420/34HS420/36HS420
18