VIVOTEK - Built with Reliability
Chapter Three
Configuation Using the Local Console
The Main Control Portal
3-1. Layout
Move your mouse cursor across the screen to display the portal.
The first functional button is Layout. You can select the 1x1, 1x3, 2x2, 3x3, 1+5,
1+3, 1+1+3, or 1+3+3 layout as the screen display. If you select the single view
layout, the rotation button
let the system swap the display of different cameras by every 10 seconds. The
rotation speed is configurable via Settings > System > Display.
3-2. DI/DO
42 - User's Manual
will appear. Click the rotation button below to
Click on the DI/DO button to display the full list of all DI and DO
signals (whether they are connected or not) from all cameras in the
configuration. If a digital input signal is triggered, e.g., the DI-4 on the
left, its indicator will turn solid white.