Table of Contents
Advertisement
4.2 Air Mouse Operation Guide
1. Open the rear cover and take out the USB receiver, insert it to the USB
port at the side of the tablet, the driver software will be auto-installed.
Please put two AAA batteries into remote on the basis of polarity, the
indicator will light off in 1 second, then close the rear cover.
2. Please correct the digital gyroscope at your first use: press
at the same time, the indicator should be glowing, please put it into the
desktop in 5 or 10 seconds till the indicator off, it shows correct success.
3. Adjust the speed of mouse: press
and
adjust mouse speed alternately. It will blink twice times under fast mode,
and it will blink one time under slow mode. The factory default to fast
mode.
4.
key means power off;
key means go to setting interface;
key means Volume up and Volume down;
interface;
key means the enter button in the standard keyboard;
key means the backspace button in the standard keyboard; and
key means page up and page down.
5. Let the mouse stands 30s, it will enter sleeping mode automatically;
press any key, it will return to use.
6. Low-Voltage Display: when the indicator blinks 3 times under pressing
any key, it means the battery is too low. Please replace battery in time.
7. If the mouse pointer to drift automatically, please refer to the above
guide to correct the digital gyroscope.
8. The USB receiver has well matched with the device before delivery. If
mixed up, please re-match as the following operations: take out the
batteries---press
and
at the same time and keep holding press
and
until reload the batteries. When the indicator light on,
please insert USB receiver to the tablet; when the indicator light off,
it shows match successfully.
12
and
at the same time, you can
key means go to search
/
4.3 Technical specifications
carrier frequency：
2.4GHz
Frequency Mode：
GFSK
transmitted power：
0dBm
Reception Range:
10 meters without barriers. Please note
it will make a big difference with the
different ranges.
Gyroscope：
3 rollers digital gyroscope
USB Receiver：
USB2.0
Power：
2xAAA battery，3.0V
Working current:
15mA，
Standby current:
15uA
Low-Voltage Display:
2.2V±0.1V
Compatible System:
Windows / Mac / Android / Linux etc.
Working Temperature:
0℃-50℃
Size:
5.12"L×1.77"W×0.91"H
13
Advertisement
Table of Contents
