Disclaimer Contents 1 Thanks ver y much for purchasing our MID product! Before using this 1 Over view product, please read the manual carefully. We will consider that you have read this manual when you use this 1.1 Appearance and Keys product.
● Never let this product exposed to the humid environment or rain as 1 Over view the water leaked in may disable it to the extent beyond maintenance. 1.1 Appearance and Keys ● You are recommended not to use the headset with large volume continuously.
1.2.2 Unlock the screen sure the battery is fully charged at the first time. On charging the Power indicating lamp of the device is in high light blue color Please press and drag the icon to the , then the LCD will the desktop icon of the batter y keeps rolling which...
applied in one direction. 2. Do not remove the Micro SD Card b efore Uninstalling it, or the card may be damaged. 3. If the memor y card is write-protected, data will not be formatted and written. Please remove the write protection before such operations.
Click Settings>Accessibility, you can set Auto rotate screen. sliding your fingers on the screen quickly. ● Custom Home Screen 1.2.15 Security Setting Press the blank area on the home screen interface for a few seconds, it will appear Choose wallpaper from menu, then you You can set the unlock pattern, each time you open or wake can set the home screen.
2. Click Continue and draw again to confirm it Select the expected wireless network , the system will directly connect the network or popup the password input window 3. Cilck confirm to complete unlock pattern designing. according to network access security settings. Please consult 4.
1.3 Technical specifications Size L 10x W 5.9x H 0.4 inches Weight 1.12 lbs LCD Display 10. 1 inch 1024 *600- Multi-point capacitive touch screen PC Interface High speed Micro USB Android 4.4 Hard Drive Capacity System Memor y Capacity Expansion Support T-Flash card 32GB(max) Format Mp3, WMA, OGG, AAC etc.
Page 9
FCC STATEMENT 1.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation. 2.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Need help?
Do you have a question about the V1043Q and is the answer not in the manual?
Questions and answers