RSS M-400 Owner's Manual page 52

Basic operation
Storing data to a library
1.
Access the LIBRARY popup.
fig.ScrChLib.eps
2.
Verify that the desired channel or effect is shown as the
object of the store operation.
3.
Press [F2 (USER)] to select the user library.
4.
Select the desired number in the library data list.
5.
Press [F5 (STORE)].
fig.ScrLibStoreConf.eps
A message will ask you to confirm the library store operation.
6.
Press [F8 (STORE)] to execute the library store operation
and close the popup.
Alternatively, press [F7 (CANCEL)] to cancel the library store
operation.
You can't overwrite library data that has been locked. Either
store the data to a different library location, or defeat the Lock
setting before you execute the store operation.
If "SCENE/LIB STORE" in the CONFIRMATION section of the
User Preference (p. 177) is not selected, a confirmation message
will not appear in step 5.
52
Locking or unlocking user library
data
Data in the user library can be locked to prevent it from being
accidentally overwritten. For library data that has been locked, the
indication "LOCK" is shown in the "STATUS" column of the list.
fig.ScrChLib.eps
1.
Press [F2 (USER)] to select the user library.
2.
From the library data list, select the desired library data.
3.
Press [F6 (LOCK)] to lock or unlock the library data.
Editing the name of user library
data
You can assign a name of up to twelve characters to user library
data. Use the NAME EDIT popup to edit the name.
fig.ScrChLib_Name.eps
1.
Press [F2 (USER)] to select the user library.
2.
From the library data list, select the desired library data.
You can't edit library data that has been locked.
3.
Press [F7 (NAME EDIT)] to access the NAME EDIT popup.
4.
Use the NAME EDIT popup to edit the name.
For details on operations in the NAME EDIT popup, refer to
"Editing a name" (p. 50).
5.
Press [F8 (OK)] to finalize the edited name and close the
NAME EDIT popup.
Alternatively, press [F7 (CANCEL)] to discard your edits and
close the NAME EDIT popup.