Editing A Name; Fader Operations - RSS M-400 Owner's Manual

Basic operation
Knob operations
fig.Cursor.eps
Knobs in the screen can be operated by the knobs of the CHANNEL
EDIT section or by the value dial. To use the value dial, move the
cursor to the desired fader.
You can make more detailed settings by holding down [SHIFT]
while you operate the knobs or the value dial.
Purple knobs in the screen cannot be edited from the
CHANNEL EDIT section.

Fader operations

fig.Fader.eps
Faders in the screen can be operated by the corresponding fader
controller or by the value dial. To use the value dial, move the cursor
to the desired fader.
You can make more detailed settings by holding down [SHIFT]
while you operate the value dial.
List operations
fig.List.eps
The selected item in a list is shown highlighted in red. Use the up/
down keys or the value dial to select a different item.
50

Editing a name

You'll use the NAME EDIT popup to edit names.
Here we'll explain operations that are common to the NAME EDIT
popup.
Operations in the NAME EDIT popup
fig.ScrNameEditGuide.eps
1
1.
Name edit field
You can edit the name in this field.
The buttons and dial will have the following functions in the
name edit field.
Button/Dial Function
Left/right buttons Move the cursor location.
Value dial Changes the character at the cursor loca-
tion
[F1 (INSERT)] Inserts a space at the cursor location. The
text at the right of the cursor location will
move to the right.
[F2 (A/a)] Changes the letter at the cursor location
between uppercase and lowercase. If the
character is not an English letter, it will be
changed to the letter "A."
[F3 (NUM)] Converts the character at the cursor loca-
tion to the numeral "0."
[F4 (DELETE)] Deletes the character at the cursor location.
The text at the right of the cursor location
will move to the left.
[F7 (CANCEL)] Cancels any changes and closes the popup.
[F8 (OK)] Confirms the changes and closes the pop-
up.
There are limitations on the number of characters you can use in
a name. The maximum number of characters will depend on the
screen or popup that uses the NAME EDIT popup.
If an INSERT operation causes the name to exceed the
maximum number of characters, the excess will be deleted.