Three Orbital Locations - Dish Network DISH Pro Plus Quick Reference Manual

Three Orbital Locations, up to 4 Tuners
DISH 500
(1) DP Twin on a DISH 500
(or two DP Dual LNBFs)
(1) DP Dual on a DISH 500
with I-Bracket
(1) DP34 Switch
Three Orbital Locations, up to 24 Tuners
DISH 500
DISH 500
Each switch must have a connected receiver to supply power
Three Orbital Locations with a Legacy Receiver
(1) DP Twin on a DISH 500
(1) DP Dual on a DISH 500 with I-Bracket
DISH
(1) DP34 Switch
500
(1) DP Adapter for each Legacy Receiver
DP PLUS DUAL TUNER
DP SINGLE TUNER
Grounding according to the National Electric Code (NEC) and all local electrical codes is required.

THREE ORBITAL LOCATIONS

DISH 500
To Receiver
Tuner Inputs
(1) DP Quad on a DISH 500
(or two DP Dual LNBFs)
(1) DP Dual on a DISH 500
with I-Bracket
Up to (6) DP34 Switches
To Receiver Tuner Inputs
To Receiver Tuner Inputs
LEGACY TUNER
Three Orbital Locations, up to 12 Tuners
DISH 500
DISH 500
Each switch must have a connected receiver to supply power
Three Orbital Locations, up to 2 Tuners
DISH 500
DP SINGLE TUNER
Three Orbital Locations, with DP Plus Twin
DISH 500
DISH 500
Single Legacy installations are not supported. Installations with
two Legacy receivers cannot view the third orbital location.
(1) DP Twin on a DISH 500
(or two DP Dual LNBFs)
(1) DP Dual on a DISH 500
with I-Bracket
Up to (3) DP34 Switches
To Receiver Tuner Inputs
(1) DP Twin on a DISH 500
(1) DP Dual on a DISH 500
with I-Bracket
(2) DP21 Switches
DISH 500
DP SINGLE TUNER
Or Legacy Receiver
with an adapter
(1) DP Plus Twin on a DISH 500
(1) DP Dual on a DISH 500
with I-Bracket
(1) DP Plus Separator
DP PLUS DUAL TUNER
DP SINGLE TUNER
Or Legacy Receiver