Advertisement
Two Orbital Locations, 2 Tuners
(1) DP Twin on a DISH 500
DP SINGLE TUNER
Or one DP Plus Dual Tuner Receiver
Two Orbital Locations, 6 Tuners
(1) DP Quad on a DISH 500
DISH 500
(1) DP34 Switches
To Receiver Tuner Inputs
Grounding according to the National Electric Code (NEC) and all local electrical codes is required.
TWO ORBITAL LOCATIONS
DISH 500
DP SINGLE TUNER
DP SINGLE TUNER
DP SINGLE TUNER
Two Orbital Locations with a
(1) DP Twin on a DISH 500
(1) DP Adapter for each Legacy Receiver
LEGACY TUNER
DP SINGLE TUNER
Two Orbital Locations, 4 Tuners
(1) DP Quad on a DISH 500
DP SINGLE TUNER
Or any combination of DP Single and DP Plus Dual-Tuner Receivers
DISH 500
Single Legacy receiver installations are not supported.
Legacy Receiver
DISH 500
DISH 500
DP SINGLE TUNER
DP PLUS DUAL TUNER
with a maximum of 4 Tuner Inputs
Two Orbital Locations
using a DP Plus Twin
(1) DP Plus Twin on a DISH 500
(1) DP Plus Separator
DP SINGLE TUNER
Or Legacy Receiver
DP PLUS DUAL TUNER
Advertisement
