Introduction
Package Contents
Installation Guide,
Warranty card and
Support information card
18 dBi Patch Panel Directional
Antenna ANT24D18
The package should contain:
•
NETGEAR 18 dBi Patch Panel Directional Antenna ANT24D18
•
Reverse N/SMA Adapter
•
Wall, pole, and ceiling mount brackets and hardware
•
Screws and plastic anchors
•
Installation Guide
•
Warranty card
•
Support information card
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the product for repair.
NOTE: To obtain optimal results in extending wireless range with antenna installations, it is
recommended that a qualified professional installer service is consulted for site survey and
proper installation.
To comply with FCC rules the ANT24D18 antenna should only be used with devices that have
been FCC approved for use with the ANT24D18. Please check the NETGEAR web site at
http://www.NETGEAR.com/go/antennas_fcc for an updated list of FCC approved devices.
In the U.S., use of the ANT24D18 18 dBi antenna with the NETGEAR Booster ANT24BNA
can only be used for point-to-point applications and the antenna and booster must be fixed
mounted on a permanent structure. For EU compliance, see page 8.
Wall, pole, and ceiling
mount brackets and hardware
Screws and
plastic anchors
1