Wideye iSavi SH-100 User Manual
Satellite terminal
Hide thumbs
Also See for iSavi SH-100:
- User manual (41 pages) ,
- User manual (49 pages) ,
- User manual (72 pages)
Related Manuals for Wideye iSavi SH-100
Summary of Contents for Wideye iSavi SH-100
- Page 3 CAUTION Hot Surface Do Not Touch Allow to cool before handling ™ iSavi User Guide...
- Page 4 ™ iSavi User Guide...
- Page 5 ™ iSavi User Guide...
- Page 6 ™ iSavi User Guide...
- Page 7 ™ iSavi User Guide...
- Page 8 ™ iSavi User Guide...
- Page 9 ™ iSavi User Guide...
- Page 10 ™ iSavi User Guide...
- Page 11 Caution Hot surface ™ iSavi User Guide...
- Page 12 ™ iSavi User Guide...
- Page 13 ™ iSavi User Guide...
- Page 14 ™ iSavi User Guide...
- Page 15 ™ iSavi User Guide...
- Page 16 ™ iSavi User Guide...
- Page 17 ™ iSavi User Guide...
- Page 18 ™ iSavi User Guide...
- Page 19 ™ iSavi User Guide...
- Page 20 ™ iSavi User Guide...
- Page 21 ™ iSavi User Guide...
- Page 22 ™ iSavi User Guide...
- Page 23 ™ iSavi User Guide...
- Page 24 ™ iSavi User Guide...
- Page 25 ™ iSavi User Guide...
- Page 26 ™ iSavi User Guide...
- Page 27 ™ iSavi User Guide...
- Page 28 ™ iSavi User Guide...
- Page 29 ™ iSavi User Guide...
- Page 30 ™ iSavi User Guide...
- Page 31 ™ iSavi User Guide...
- Page 32 ™ iSavi User Guide...
- Page 33 ™ iSavi User Guide...
- Page 34 Magnetometer Calibration ™ Navigate to Settings >Calibration to perform magnetometer calibration to your iSavi i. Click on the Start button and check the ‘left’ and ‘right’ of the Antenna Pointing LEDs are flashing green. ii. Rotate your terminal in a clockwise direction around the Y-axis. Note: Depending on the strength of the magnetic interference, you may be required to rotate the iSavi ™...
- Page 35 ™ iSavi User Guide...
- Page 36 ™ iSavi User Guide...
- Page 37 Note: Failure of the calibration can be caused by magnetometer interference from the surrounding area. You need to change to a new location for recalibration process. ™ iSavi User Guide...
- Page 38 1. My iSavi ™ does not turn on successfully. i. Check if the battery is attached correctly. Press and hold the Power Button for 5 seconds. ii. Check battery level. If battery level is low, the battery should be charged for at least 20 minutes to have sufficient power to switch on the terminal.
- Page 39 10. GPS not available after time-out. ™ Power off your iSavi by pressing and holding the Power Button for 5 seconds. Repeat the procedure as describe in FAQ 9. 11. Magnetic interference detected. ™ ™ Move your iSavi to new location. Ensure that your iSavi is placed outside and away from electrical devices, metal objects, or appliances that generate RF noise, and with an unobstructed view of the sky.
- Page 40 A firmware upgrade failure may be due to using an incorrect upgrade package file. Check that the correct firmware upgrade package has been selected. You can refer to www.wideye.com.sg. The latest firmware is available under Support>Downloads. Failure can also be due to an interruption of the power supply during firmware upgrade.
- Page 41 28. What is the safety distance to prevent radiation from the terminal? ™ For safety reason, never stand closer than one metre in front of your iSavi terminal’s transceiver when it is connected to the network. ™ iSavi User Guide...
- Page 42 ™ iSavi User Guide...
- Page 43 ™ iSavi User Guide...
- Page 44 † † ™ iSavi User Guide...
- Page 45 † † † ™ iSavi User Guide...
- Page 46 † † ™ iSavi User Guide...
- Page 47 Dimensions (L x W x H ) Overall Terminal 180 x 170 x 30 mm 7.09 x 6.69 x 1.18 in Transceiver 130 x 170 x 30 mm 5.12 x 6.69 x 1.18 in Standard Battery Pack 50 x 170 x 30 mm 1.97 x 6.69 x 1.18 in Weight Overall Terminal...
- Page 48 ITEM SPECIFICATION Battery Type Lithium ion, rechargeable Nominal Voltage 10.8V Standard Battery Capacity Charging temperature 0°C to +40°C Operating temperature -20 °C to +55 °C, -4°F to +131°F Min. charge cycles Storage Temperature 1 month -20 °C to +45 °C, -4°F to +113°F 6 months -20 °C to +40 °C, -4°F to +104°F 1 year...
- Page 49 ™ iSavi User Guide...