Advertisement
Table of Contents
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for INSTEON 2842-222
Summary of Contents for INSTEON 2842-222
- Page 1 INSTEON Motion Sensor 2842-222 Quick Start Guide...
- Page 2 INSTEON Motion Sensor Status LED ® Wall Mount Retention Slot Settings Set Button Jumpers 9V Battery (Included) (Cover Removed)
-
Page 3: Jumper Settings
Jumper Settings To configure settings like Night-Only mode and Light Sensitivity via the INSTEON Hub, ensure jumper five is installed over both pins. -
Page 4: Sensor Placement
Sensor Placement Affix the mount to a surface and slide the mount into the retention slot on the rear of the sensor. Avoid areas of rapid heat change. ® Motion Sensor detection areas 40’ 20’ 10’... - Page 5 Linking to the Hub Follow the on-screen instructions to add your Motion Sensor to the INSTEON Hub. If not using the Hub, refer to the instructions that came with your product.
- Page 6 Remove the back cover and when prompted, press and hold the set button until the status LED begins blinking. Tap the set button. The status LED will double-blink.
-
Page 7: Configure Alerts
To receive email and text message alerts when motion is detected, switch on alerts from device settings within the INSTEON app. Trigger a Scene Add your Motion Sensor to a scene using the INSTEON Hub and it will control the scene. INSTEON Schedule Time of Day Sunrise... -
Page 8: Learn More
Learn More For the complete Owner’s Manual, video tutorials, product support and more, visit: insteon.com/support MANUAL Protected under U.S. and foreign patents (see www.insteon.com/patents) ©2014 INSTEON RAW-1297 Rev 03.13.14...
Need help?
Do you have a question about the 2842-222 and is the answer not in the manual?
Questions and answers