wIreless surveIllance sYstem 18cm lcd dIgItal vIdeo recorder sc242 wIth two day/nIght cameras QuIcK start guIde ON BACK COVER wIreless WIRELESS VIDEO SIGNAL TRANSMISSION WITH DIGITAL ENCRYPTION WITHOUT SIGNAL LOSS 18cm colour nIgHt sd card 50 metres vIsIon lcd screen STORE RECORDINGS LONG TRANSMISSION 24 INFRA-RED LEDs...
Page 2
wIreless surveIllance sYstem IMPORTANT BEFORE RETURNING THIS PRODUCT TO THE RETAILER PLEASE CONTACT IF YOU HAVE ANY CONCERNS OR PROBLEMS WITH THIS PRODUCT Customer Service Phone: (03) 9982 5111 (Monday to Friday 8.30am – 5.30pm EST) Email: customerservice@orionlive.com.au For further information visit www.orionlive.com.au 1 identification REMOTE POWER INPUT...
wIreless surveIllance sYstem 2 features 3 responsible use › › 18cm 16:9 LCD screen. Please ensure this equipment is used in accordance with any local laws or › 2.4 GHz digital frequency hopping spread regulations, especially if your device is spectrum (FHSS).
wIreless surveIllance sYstem 5 sYsteM connection Power supply to Wireless camera connection to camera Power supply to DVR Wireless Power connection supply to to camera camera 6 dVr control panel REMOTE CONTROL MENU RECEIVER SETTINg PLAYBACK DVR AV OUTPUT INSTANT CONTROL RECORD DVR DISPLAY...
wIreless surveIllance sYstem 7 reMote control function BUTTON FUNCTION BUTTON FUNCTION Turn ON/OFF display screen 1. To scroll up and down to select item in menu mode 2. To increase or decrease volume View channel 1 camera in live or playback mode on display 1.
wIreless surveIllance sYstem 9 sYsteM installation › It IS RECoMMENDED to SEt UP AND tESt UNItS BEfoRE fUll INStAllAtIoN. 1 Install antenna on DVR unit and all cameras. 2 Install stand on DVR unit. DO NOT permanently mount cameras and DVR during set up stage.
Page 7
wIreless surveIllance sYstem 6 DVR screen will automatically turn on after power supply connected. 7 The cameras come with the kit have already paired to the DVR. Live image from camera will be displayed on the DVR display screen when power is connected. 8 Insert SD card into the DVR.
wIreless surveIllance sYstem 11 operation When SD card is full, recording will automatically YOU SURE, select “YES or NO” then press stop, or over write function can be enable to “>||” button to confirm. over write: › SECtIoN 4: CAMERA PAIRINg MENU>RECORD SETUP>SD OVER WRITE>YES The cameras come with the kit have already ›...
wIreless surveIllance sYstem 12 troubleshooting guide PrOBlem POssIBle CaUse sUggesTed remedy dVr/Camera has Power supply is loose or unplugged, Check all cables and power supply connection. no power or not no power at socket outlet/power point Check power at socket outlet/power point. powering up sd Card is not SD card not formatted...
wIreless surveIllance sYstem 13 specifications DIgItAl VIDEo RECoRDER CAMERA › DISPlAy › VIDEo display screen 18cm [7”] TFT LCD [16:9] Image sensor Type CMOS Colour Image Sensor screen resolution 800 x 480 RGB effective Pixels 640 x 480 Video standard PAL or NTSC lens F=2.5mm...
Page 12
wIreless surveIllance sYstem QuicK start guide Install antenna Install stand Connect power on DVR unit and supply to a 240V on DVR unit. all cameras. power point Do not permanently and DVR. mount cameras and DVR at this stage. Install stands on all Connect power DVR screen will cameras.
Need help?
Do you have a question about the S242 and is the answer not in the manual?
Questions and answers