Related Manuals for Orion AM2000
Summary of Contents for Orion AM2000
-
Page 1: Instructions For Use
PROFESSIONAL SECURITY SYSTEM WIRELESS AUTODIAL AM2000 HOME ALARM SYSTEM INSTRUCTIONS FOR USE IMPORTANT! PLEASE READ THESE INSTRUCTIONS CAREFULLY. - Page 2 THESE PREMISES ARE PROTECTED BY A MULTI-DETECTION POINT SECURITY SYSTEM SENSORS MOUNTING SCREWS, PLUGS AND BRACKETS 2 X RFID TAGS 2 X RFID TAGS USER MANUAL WIRELESS AUTODIAL HOME ALARM SYSTEM AM2000 WIRELESS AUTODIAL WIRELESS AUTODIAL WIRELESS AUTODIAL HOME ALARM SYSTEM...
-
Page 3: Alarm Panel
GSM SMS function of AM2000 Home Alarm System. 3. Please store the AM2000 SIM card number in a safe place and keep as a secret because AM2000 Home Alarm System can be controlled via SMS operation. -
Page 4: Speed Dial
SMS once someone disarms the paired successfully. system by RFID tag. 8. After pairing, disconnect power supply and 2. RFID tags only operate when AM2000 alarm panel is powered by power supply. reassemble front cover. 2.5 SPEED DIAL 9. -
Page 5: Phone Call
Send a text of “?” to the SIM card number, the operation guide message will be replied. You can control the alarm system by following the guide message: Send: 2.9 DISARM Send: System replies first grade guide menu: 2.10 ARM Send: Send: WIRELESS AUTODIAL HOME ALARM SYSTEM AM2000... -
Page 6: Two-Way Talk
2.13 CALL-BACK TO RECORD VOICE MEMO Send: Send ‘4’ to the SIM card number, the alarm will call back. Pick up the phone, and leave Forward > Edit 10 seconds message. The panel will hang up after 10 seconds. WIRELESS AUTODIAL HOME ALARM SYSTEM AM2000... -
Page 7: Record Alarm Voice Message
10 seconds. 4. Communicate an alarm message clearly to the alarm panel microphone. 5. If the recording is successful, this voice message will be played upon picking up an alarm call. WIRELESS AUTODIAL HOME ALARM SYSTEM AM2000... -
Page 8: Change Zone Name
SMS notice is changed, users can receive notice SMS once 2.22 SMS ALERT FOR LOW BATTERY someone disarms the system by RFID tag. 2. RFID tags only operate when AM2000 alarm panel OF ACCESSORIES is powered by power supply. -
Page 9: Entry And Exit Delay Time
Alarm will beep every second to remind user to exit premises. The reminder beep speeds up in the last 15 seconds. If intruder is detected, the alarm is delayed based on this delay time. WIRELESS AUTODIAL HOME ALARM SYSTEM AM2000... -
Page 10: Change Disarm Password
Send: Or press Tamper Switch 3 times within 3 sec., accessories will be cleared after two beeps. 2.31 DELETE RFID TAGS BY SMS Forward > Edit Send: WIRELESS AUTODIAL HOME ALARM SYSTEM AM2000... -
Page 11: Arm & Disarm By Free Phone Call
NOTE: Do not press and hold more than one button at the time. emergency alarm state. After a button is pressed, please wait for 5 seconds for the command to be completed. WIRELESS AUTODIAL HOME ALARM SYSTEM AM2000... -
Page 12: Wireless Motion Sensor
AM2000 control panel. GROUND LED ON/OFF – set the jumper to ON or OFF position to activate or deactivate LED indication. ZONE SETTING – set the jumpers to different zone mode for different alarm activation method. TOP VIEW SIDE VIEW WIRELESS AUTODIAL HOME ALARM SYSTEM AM2000... -
Page 13: Operation
Key in the password and press the connect SINGLE DELAY ZONE – when AM2000 is key on AM2000 control panel, and then press armed, if intruder detected, it will trigger alarm the test button twice on the back of the sensor after 30 seconds time delay in default settings. - Page 14 2. Mount the sensor on the door frame on. When one beep sound from the AM2000 and the magnet on the door. control panel is heard, they are paired.
-
Page 15: Specifications
Up to 50m* Radio Frequency 433MHz Operating Temperature 10°C~55°C Operating Humidity < 80% Dimensions Sensor: 71(L) x 34(W) x 17.5(H)mm Magnet: 51(L) x 12(W) x 13.5(H)mm * Range depends on location, temperature and battery conditions. WIRELESS AUTODIAL HOME ALARM SYSTEM AM2000... -
Page 16: Warranty
Check the SIM card account periodically to ensure there is sufficient credit for the GSM SMS function to operate correctly. No interaction The sensor and Please pair the sensor and AM2000 alarm panel between sensor AM2000 alarm following pairing instruction. and AM2000...
Need help?
Do you have a question about the AM2000 and is the answer not in the manual?
Questions and answers