Download Print this page

Universal Electronics Nebula Catalyst 34 User Manual

Advertisement

Quick Links

Nebula Catalyst 34
PROGRAMMING A DEVICE
The Nebula Catalyst 34 remote comes pre-programmed to
operate an Universal TV, VCR or DVD, Cable or Satellite
Receivers, Amplifiers or Tuners, and Auxiliary devices. To
control devices other than default brands, follow these steps;
otherwise, skip this section.
Before proceeding, find the codes for the devices you want to
program in "Manufacturer's Codes" on the right side of this
page and write them down or highlight them.
NOTE: To program a TV or mobile LCD device, use the TV key.
To program a DVD Player, TV/DVD Combo, TV/VCR/DVD
Combo, portable DVD player, or mobile DVD player, use the
DVD key.
1.
Turn on the device (for example, DVD player) and, if
needed, load media (for example, a DVD).
2.
Press a device key (TV. VCR/DVD, CBL/ SAT, or AUX).
3.
Press and hold SETUP until the red LED blinks twice, then
release.
4.
Enter the first five-digit code for your device. The LED
blinks once as each digit is entered. If the code is correct,
the LED blinks twice.
NOTE: If the LED does not blink twice, repeat steps 2 to 4 and
try entering the code again.
5.
Aim the remote at the device and press Power. The device
should turn off. If it does not, repeat steps 3–5, trying
each code for your brand until you find one that works. If
you cannot find a code that works, see "Searching for Your
Code".
6.
Repeat steps 1 to 5 for the other devices you want to
control. For future reference, write down each working
device code below:
AUX Code:
User's Guide
CBL Code:
INTRODUCTION
Thank you for purchasing a Nebula Catalyst 34 remote. Your
CD Code:
remote lets you control 4 devices with one easy-to-use,
compact unit.
After installing the batteries, you can immediately program the
DVD Code:
Nebula Catalyst 34 remote to control your Universal TV, VCR or
DVD, Cable or Satellite Receivers, Amplifiers or Tuners, and
SAT Code:
Auxiliary devices. To do so, follow the instructions in
"Programming a Device". For best results, please read and
follow all the remaining instructions. Also, keep this guide for
TNR Code:
future reference.
INSTALLING BATTERIES
TV Code:
Your Nebula Catalyst 34 remote requires 2 AA batteries (not
supplied).
VCR Code:
Battery Use And Safety
Use only fresh batteries of the required size and
recommended type.
SEARCHING FOR YOUR CODE
Do not mix old and new batteries, different types of
batteries (standard, alkaline, or rechargeable), or
If your device does not respond to the remote after trying all
rechargeable batteries of different capacities.
codes listed for your brand, or if your brand is not listed, try
If you do not plan to use the remote for an extended
searching for your code:
period, remove the battery. It can leak chemicals that can
1.
Press a device key once.
destroy electronic parts.
2.
Press and hold SETUP until the red LED blinks twice, then
WARNING: Dispose of old batteries promptly and properly. Do
release.
not burn or bury them.
3.
Enter 9 9 1, then the device group number (see table
below). The LED blinks twice.
To Install Batteries:
Code
Device Group
1.
Open the battery compartment cover (located on the back
of the remote).
0
Cable (Cable Converters, Video
2.
Place the AA batteries in the compartment and match the
Accessories, Satellite Receivers)
+ and - polarity symbols inside.
1
TV (TVs)
3.
Replace the cover.
2
VCR (VCRs, DVD players)
NOTE: When the Nebula Catalyst 34 remote stops operating
properly, replace the batteries within 10 minutes (to protect the
3
Audio (Audio Amplifiers, Audio
programming information).
Amp/Tuners, CD players)
A QUICK LOOK AT THE CONTROLS
4.
Aim the remote at the device and press Power. The
remote sends IR codes from its library to the selected
Press this key...
To...
device, starting with the most popular code first. If the
device responds, go to step 6.
Select a device.
5.
If the device does not respond, press CH+. The remote
will try the next code. Continue until the device responds.
Note: Press CH- to try the previous code.
Turn the selected device on or off.
6.
To set the code, press SETUP once. The LED blinks twice.
7.
To search for other device codes, repeat steps 1 to 6.
Program sequences.
Select the next or previous channel.
CHECKING THE CODES
Select next or previous chapter on some
If you have set up the remote using the procedure in "Searching
models of DVD players.
for Your Code", you may need to find out which four-digit code
Press LAST to recall the last-viewed channel.
is operating your equipment.
Raise or lower the sound level.
For example, to find out which code is assigned to your TV:
Press MUTE to turn the sound off or on.
1.
Press TV once.
2.
Press and hold SETUP until the red LED blinks twice, then
release.
Move the cursor in the menu screens.
Enter 9 9 0. The LED blinks twice.
3.
Press OK to choose the highlighted menu
4.
To view the code for the first digit, press 1. Count the LED
option.
blinks (for example, three blinks = 3), and write down the
number in the appropriate code listing in step 8 under
Skip backward, rewind, fast forward, skip
"Programming a Device".
forward, stop, pause, or play tracks on the
NOTE: If a code digit is 0, the LED does not blink.
current disc.
5.
Repeat step 4 for the four remaining digits, using 2 for the
second digit, 3 for the third digit, 4 for the fourth digit,
View the current channel and program
and 5 for the fifth digit.
information. .
6.
To check for other device codes, repeat steps 1–5,
Display the menu for the selected device.
substituting the device key for TV.
Exit the selected device's menu, guide, or
CHANGING VOLUME LOCK
program without making a menu selection.
The Nebula Catalyst 34 remote comes preset to allow
Display the program guide for the selected
independent volume control of each selected device (Global
device.
Volume Unlock). However, you may change the Volume Lock
Switch the TV's, VCR's, SAT's, or DVD's input
setting to Global Volume Lock so that one device's volume will
to view TV or video programs.
control volume in all other modes. After that, you can perform
Individual Volume Unlock on a selected device to set its
Directly enter channels (for example, 09 or 31).
volume control for independent operation or Global Volume
Press +100 to enter channels over 100 (for
Unlock to remove all volume locking.
example, +100, 3, 1 = 131). For a DVD player,
use +100 to access chapters over 10 (for
Locking Volume Control to One Mode (Global Volume Lock)
example, +100, 3 = 13).
1.
Press and hold SETUP until the red LED blinks twice, then
Press Enter to send channel number entries on
release.
some TV models.
2.
Enter 9 9 3 and then press the mode key for the device you
Denon
31360, 31142, 30904
want to control volume (for example, TV). The LED blinks
Fonmix
31360
twice. Now when you press VOL+, VOL-, or Mute, the
Glory Horse
31263
selected device (for example, TV) will control the volume
Harman/Kardon
30110
regardless of the current mode.
Hitachi
31273
Unlocking All Volume Control (Restoring Global Unlock)
Inkel
30027
1.
Press and hold SETUP until the red LED blinks twice, then
Integra
30135
release.
2.
Enter 9 9 3 and then press VOL+. The LED blinks four
JBL
30110
times. Volume is independently controlled for all
JVC
30074, 31263
programmed devices.
Kenwood
31313, 31570, 30027
KLH
31428
Unlocking a Single Device's Volume Control
1.
Press a device key (TV. VCR/DVD, CBL/ SAT, or AUX).
Magnavox
31189, 31269, 30531
2.
Press and hold SETUP until the red LED blinks twice, then
Marantz
31189, 31269, 30039
release.
MCS
30039
3.
Enter 9 9 3 and then press VOL-. The LED blinks four
Onkyo
30842, 30135
times. Volume is independently controlled for the selected
Optimus
31023, 30670, 30531, 31074
devices.
Panasonic
31518, 30039
USING KEYMOVER
Philips
31189, 31269
Pioneer
31023, 30150, 30014, 30630, 30531
Your Nebula Catalyst 34 includes a Keymover feature that
Proscan
31254
allows you to map (or copy) keys from one mode (i.e., source
mode) to another mode (i.e., destination mode) or to a
Qisheng
31609
different key in the same mode.
Quasar
30039
NOTE: Do not use any of the Device Keys, POWER, RECORD, or
RadioShack
31263
SETUP as a source or destination key.
RCA
31023, 31609, 31254, 30531, 31074
Sharper Image
31263
Moving Keys in the Same Device Mode
1.
Press a device key (TV. VCR/DVD, CBL/ SAT, or AUX).
Silsonic
30176
2.
Press and hold SETUP until the LED flashes twice.
Sony
31058, 31441, 31258, 31759
3.
Press 9 9 4.
Soundesign
30670
4.
Press the key you want to move.
Stereophonics
31023
5.
Press the new key that should perform the function. The
Sunfire
31313
LED blinks twice.
Teac
31074, 31267
6.
Repeat until you are finished moving keys.
Technics
31308, 31518, 30039
Moving Keys to a Different Device Mode
Thorens
31189
This lets you, for example, control DVD functions while in TV
mode. You would move the transport key functions (Play, Stop,
Victor
30074
etc.) from DVD mode to TV mode, as follows:
Wards
30014
1.
Press a device key (TV. VCR/DVD, CBL/ SAT, or AUX).
Yamaha
30176, 31276, 31176
2.
Press and hold SETUP until the LED flashes twice.
Setup Codes for CD Players
3.
Press 9 9 4.
Aiwa
30157
4.
Press the key of the device containing the function you to
want to move (e.g., DVD).
Burmester
30420
5.
Press the key you want to move (e.g., Play).
California Audio Labs 30029
6.
Press the key of the device where you want the function
Carver
30157, 30179
(e.g., TV).
Denon
30873
7.
Press the key in the new mode that should perform the
DKK
30000
function (e.g., Play). The LED blinks twice.
DMX Electronics
30157
8.
Repeat until you are finished moving keys.
Dynamic Bass
30179
Restoring Original Key Function
Fisher
30179
1.
Press a device key (TV. VCR/DVD, CBL/ SAT, or AUX).
Garrard
30420
2.
Press and hold SETUP until the LED flashes twice.
3.
Press 9 9 4.
Genexxa
30032
4.
Press the device key you selected in step 1 twice.
Harman/Kardon
30157, 30173
5.
Repeat for each device you want to restore.
Hitachi
30032
Integra
30101
TROUBLESHOOTING
JVC
30072
PROBLEM: LED does not blink when you press a key.
Kenwood
30826, 30626, 30028, 30037, 30036, 30190
Krell
30157
SOLUTION: Replace battery with one new 3.3 V 2032 Lithium
battery.
Linn
30157
Magnavox
30157
PROBLEM: LED blinks when you press a key, but device does
not respond.
Marantz
30626, 30029, 30157
SOLUTION: Make sure the remote is aimed at your device and is
MCS
30029
not more than 15 feet away.
Miro
30000
PROBLEM: LED blinks one long blink.
Mission
30157
SOLUTION: An entry error has occurred (for example, wrong
MTC
30420
key). Try entry sequence again.
NSM
30157
PROBLEM: Remote does not control devices or commands are
Onkyo
30868, 30101
not working properly.
Optimus
31063, 30000, 30032, 30037, 30420, 30179,
SOLUTION: Try all listed codes for the device. Make sure the
31075, 30145
device operates with an infrared remote control.
Panasonic
30029
PROBLEM: CH+, CH-, and LAST do not work for your RCA TV.
Parasound
30420
SOLUTION: Due to RCA design from 1983 to 1987, only the
Philips
30626, 30157
original remote control will operate these functions.
Pioneer
31063, 31062, 30032
PROBLEM: No volume on a device.
Polk Audio
30157
SOLUTION: See "Changing Volume Lock".
Proton
30157
PROBLEM: Channels do not change properly.
QED
30157
SOLUTION: If the original remote control required you to press
Quad
30157
Enter to change channels, press Enter on this remote after
Quasar
30029
entering the channel number.
RadioShack
31075
RCA
31062, 30032, 30420, 30179, 30053
MANUFACTURER'S CODES
Realistic
30420, 30179
Setup Codes for Audio Amplifiers
Rotel
30157, 30420
Bose
30674
SAE
30157
GE
30078
Sansui
30157
JVC
30331
Sanyo
30179
Marantz
30321
SAST
30157
Nakamichi
30321
Sharp
30861, 30037
NEC
30264
Silsonic
30888, 30036
Optimus
30395
Sonic Frontiers
30157
Realistic
30395
Sony
30490, 30000, 30100
Sansui
30321
Soundesign
30145
Shure
30264
TAG McLaren
30157
Sony
30689
Tascam
30420
Soundesign
30078
Teac
30420
Victor
30331
Technics
30029
Wards
30078
Victor
30072
Yamaha
30354, 30133
Wards
30157, 30053
Yamaha
30888, 30036
Setup Codes for Audio Amp/Tuners
ADC
30531
Zonda
30157
Aiwa
31405, 31243, 30121
Setup Codes for DVD Players
Anam
31609, 31074
Aiwa
20641, 21912
Audiotronic
31189
Akai
20770
Bose
31229
Allegro
20869
Capetronic
30531
Apex Digital
20672, 20717, 20797, 21061, 20796, 21056,
Carver
31189
21937, 20794, 21020, 21915
Coby
31263
Blaupunkt
20717
Blue Parade
20571
Carnivale
10030
Broksonic
20695
Carver
10054
Changhong
20627, 21061
Celebrity
10000
CineVision
20869
Celera
10765
Coby
21086
Changcheng
10051, 10661
Curtis Mathes
21087
Changhong
10156, 10765, 11156, 10767
CyberHome
21024, 21023, 21129, 20816, 21117
Ching Tai
10092
Daewoo
20833, 21172, 20869
Chun Yun
10000, 10180, 10700, 10092, 10843
Denon
20490
Chung Hsin
10180, 10053
DVD2000
20521
Cinema
10672
Emerson
20591, 20675
Citizen
10060, 10030, 11928, 10092
Enterprise
20591
Clarion
10180
Fisher
21919
Commercial Solutions 11447, 10047
Funai
20675
Conrowa
10156, 10145, 11156
Gateway
21158, 21073
Contec
10180
GE
20522, 20717
Craig
10180
Go Video
20744, 20833, 21099, 20783, 21075, 20869,
Crosley
10054
21730
Crown
10180
Greenhill
20717
Curtis Mathes
10047, 10054, 10154, 10451, 10093, 10060,
Harman/Kardon
20582, 20702
10702, 10030, 10145, 10166
Hitachi
20573, 20664, 21919
CXC
10180
Hiteker
20672
Daewoo
10154, 10451, 10180, 10030, 10178, 10672,
11928, 10092, 10661, 11909, 10623, 10700
Initial
20717
Integra
20627, 21924
Dayu
10661
Dell
11080
JBL
20702
Denon
10145
JVC
20558, 20623, 20867
Dumont
10017
Kenwood
20490, 20534
KLH
20717, 21020, 21149
Durabrand
10463, 10180, 10178, 10171, 11034
Electroband
10000
Koss
20651, 21980
Emerson
10154, 10236, 10463, 10180, 10178, 10171,
Lasonic
20798
11944, 11909, 11929, 11905, 11928, 10623,
LG
20591, 20869, 20801
11911
Liquid Video
21980
Envision
10030
Lite-On
21158, 21058
Ether
10030
Loewe
20511
Firstar
10236
Magnavox
20503, 20539, 21976, 21914, 20675
Fisher
10154
Marantz
20539
Fortress
10093
Memorex
20695
Fujitsu
10809, 10853
Microsoft
20522
Funai
10180, 10171, 11904
Mintek
20717
Furi
10145
Mitsubishi
21521, 20521
Futuretech
10180
Nesa
20717
Gateway
11756, 11755
Norcent
21003
GE
11447, 10047, 11454, 10051, 10451, 10180,
Onkyo
20503, 20627, 21924, 20792
10030, 10178, 11917, 10092, 11907, 11922
Oritron
20651, 21980
Gibralter
10017, 10030
Panasonic
20490, 21762, 21990
GoldStar
10154, 10030, 10178, 11926
Philips
20503, 20539, 20646, 21914
Grunpy
10180
Pioneer
20525, 20571
Haier
11034
Polaroid
21086, 21061
Hallmark
10178
Polk Audio
20539
Hankook
10180, 10030, 10178
Portland
20770
Harley Davidson
11904
Proscan
20522
Harman/Kardon
10054
Qwestar
20651
Harvard
10180
RCA
20522, 20571, 20717, 20822
Havermy
10093
Rio
20869
Helios
10865
Rotel
20623
Hello Kitty
10451
Sampo
20752, 20698
Hisense
10156, 10748, 10145, 11156
Samsung
20490, 20573, 21932, 21075, 20820
Hitachi
10156, 10030, 10178, 11145, 10145, 10092,
Sansui
20695
11904, 11156
Sanyo
20695
Hongmei
10093
Sharp
20630, 20752
Huafa
10145
Sharper Image
21117
Huari
10145
Sherwood
20770
Huodateji
10051
Shinco
20717
Imperial Crown
10661
Shinsonic
20533
Infinity
10054
Sonic Blue
20869, 21099
Inteq
10017
Sony
20533, 20864, 21033, 21904, 21903
JBL
10054
SVA
20717
JCB
10000
Sylvania
20675
Jean
10156, 10051, 10236, 10092
Symphonic
20675
Jensen
10761
Teac
20717, 21984, 20809
Jiahua
10051
Technics
20490
Jinfeng
10051
Theta Digital
20571
Jinxing
10054, 10156, 10145
Toshiba
20503, 20695
JVC
10053, 11923, 11253
Urban Concepts
20503
Kangli
10661
Xbox
20522
KEC
10180
Yamaha
20490, 20539, 20545
Kenwood
10030
Zenith
20503, 20591, 20869
KLH
10765, 10767
Setup Codes for TVs
Kolin
10180, 10150, 10053
Addison
10092
KTV
10180, 10030
Admiral
10093, 10463
Kunlun
10051, 10661
Advent
10761, 10842
LG
10060, 10030, 10178, 10856, 10700, 10025
Aiko
10092
Lloyd's
11904
Aiwa
11914
LXI
10047, 10054, 10154, 10156, 10178
Akai
10812, 10702, 10030, 10672, 11903
Magnasonic
11928, 11913
Albatron
10700, 10843
Magnavox
11454, 10054, 10030, 10706, 11931, 11254,
America Action
10180
11913, 11904, 11944
Anam
10250, 10180, 10700
Magnin
11907
Anam National
10250, 10650
Marantz
10054, 10030, 10704
Anhua
10051
Matsushita
10250, 10650
AOC
10451, 10093, 10180, 10060, 10030, 10178,
Maxent
11755
10092
Megapower
10700
Apex Digital
10748, 10765, 10879, 10767, 11943
Megatron
10178, 10145
Audiovox
10451, 10180, 10875, 10092, 10623
Memorex
10154, 10463, 10150, 10178, 11911, 11926,
Baile
10661
11924, 11920, 11927
Beijing
10812, 10661
MGA
10150, 10030, 10178, 11907
Bell & Howell
10154
Midland
10047, 10017, 10051
BenQ
11032
Mitsubishi
10154, 10250, 10093, 10236, 10180, 11250,
Bradford
10180
10150, 10030, 10178, 11917, 10836
Broksonic
10236, 10463, 11911, 11938, 11905, 11935,
Monivision
10843, 10700
11929
Motorola
10093
Cailing
10748
MTC
10060, 10030
Candle
10030
Mudan
10051
Multitech
10180
NAD
10156, 10178, 10866
National
10051
NEC
10154, 10156, 10051, 10053, 10030, 10178,
11704
Newave
10093, 10178, 10092
Nikko
10030, 10178, 10092
Norcent
10748, 10824
NTC
10092
Onwa
10180
Optimus
10154, 10250, 10166, 10650, 11927, 11924,
11913
Optonica
10093
Orion
10236, 10463, 11929, 11911, 11905
Panasonic
10054, 10250, 10051, 10650, 11941, 11927,
11924
Panda
10051, 10706
Penney
10047, 10156, 10051, 10060, 10030, 10178,
11926, 11907
Philco
10054, 10180, 10030, 10178
Philips
11454, 10054, 10000, 10051, 10030, 10178,
10092, 10690
Pilot
10030
Pioneer
10166, 10866, 10679
Portland
10092
Prima
10761
Princeton
10700
Prism
10051
Proscan
11447, 10047, 11922
Proton
10030, 10178
Pulsar
10017
Qingdao
10051
Quasar
10250, 10051, 11924, 10650
RadioShack
10047, 10154, 10180, 10030, 10178, 11920,
11904
RCA
11447, 10047, 11454, 10000, 10030, 10178,
11547, 11922, 11917, 10092, 11907, 11948,
10090, 10679
Realistic
10154, 10180, 10030, 10178
Rowa
10748
Runco
10017, 10030
Sampo
10154, 10093, 10030, 10178, 10171, 10700,
10650, 11755, 10092
Samsung
10154, 10156, 10060, 10812, 10702, 10030,
10178, 11060, 10814, 10092, 11903, 10090,
10766
Sansui
10463, 11904, 11935, 11929, 11911
Sanyo
10154, 10156, 10180, 10145, 11907
Sanyuan
10093
Scotch
10178
Scott
10236, 10180, 10178
Sears
10047, 10054, 10154, 10156, 10178, 10171,
11926, 11904
Shaofeng
10145
Sharp
10093, 10030, 10650, 11917
Shen Ying
10092
Shencai
10145
Sheng Chia
10093, 10236
Skygiant
10180
Skyworth
10748
Sony
11100, 10000, 10650, 11925, 11904
Soundesign
10180, 10178
Sowa
10156, 10051, 10060, 10178, 10092
Squareview
10171
SSS
10180
Starlite
10180
Studio Experience
10843
Supreme
10000
SVA
10748, 10865
Sylvania
10054, 10030, 10171, 11944, 11931
Symphonic
10180, 10171, 11913, 11904
Synco
10000, 10451, 10093, 10060, 10178, 10092
Tacico
10178, 10092
Tandy
10093
Tashiko
10092, 10650
Tatung
10054, 10154, 10156, 10051, 10060, 11156,
11756, 11254
Technics
10250, 10051
Techwood
10051
Teco
10051, 10093, 10178, 10092
Teknika
10054, 10180, 10150, 10060, 10092
Telefunken
10702
Tera
10030
Thomas
11904
Tiane
10093
TMK
10178
TNCi
10017
Tobo
10748
Toshiba
10154, 10156, 10060, 10145, 11945, 11704,
11936, 11156, 11935, 10650, 11918
Tuntex
10030, 10092
TVS
10463
V Inc.
11756, 10885, 10864
Vector Research
10030
Victor
10250, 10053, 10650
Vidikron
10054
Vidtech
10178
Viewsonic
11755, 10885, 10864
Wards
10054, 10030, 10178, 10866, 11156
Warumaia
10661
Waycon
10156
White Westinghouse
10463, 11909, 10623
Yamaha
10030

Advertisement

loading

Summary of Contents for Universal Electronics Nebula Catalyst 34

  • Page 1 11447, 10047, 11454, 10000, 10030, 10178, Fisher 10154 Press a device key (TV. VCR/DVD, CBL/ SAT, or AUX). Marantz 20539 Nebula Catalyst 34 remote to control your Universal TV, VCR or Yamaha 30176, 31276, 31176 11547, 11922, 11917, 10092, 11907, 11948, Fortress 10093 Press and hold SETUP until the LED flashes twice.
  • Page 2 radio frequency energy and if not installed and used in Yapshe 10250 Daewoo 20045, 20104, 20278 Kenwood 20067, 20038 Olympus 20035 Sharp 20048, 20209 White Westinghouse 20209, 20072 accordance with the instructions, may cause harmful Zenith 10017, 10463, 10178, 11904, 11929, 11911, Dell 21972 20072...