Important Information About Lp Gas Connections; What Is A Regulator; Regulator Connections; Type 1 Connective Coupling - Weber Spirit E210 Owner's Manual

IMPORTANT INFORMATION ABOUT LP GAS CONNECTIONS

WHAT IS A REGULATOR?

Your Weber gas grill is
®
equipped with a pressure
regulator, which is a device to
control and maintain uniform
gas pressure as gas is
released from the LP cylinder.

REGULATOR CONNECTIONS

Each Weber ® LP regulator is designed for vapor
withdrawal and is equipped with a UL-listed Type 1
cylinder connection as described in the latest edition of
ANSI Z21.58. THE LP CYLINDER THAT YOU CONNECT
TO THE REGULATOR MUST BE EQUIPPED WITH A
COMPATIBLE TYPE 1 CONNECTION IN THE CYLINDER
VALVE. This Type 1 connection allows you to make a fast
and safe hookup between your Weber
LP cylinder.
NOTE: Gas will not flow from the cylinder unless the Type
1 coupling is fully engaged.
• The pressure regulator supplied with the Weber
grill must be used. This regulator is set for 11 inches of
water column pressure.
• Replacement pressure regulator and hose
assemblies must be those specified by Weber-
Stephen Products LLC.
• Be sure the regulator is mounted with the small vent
hole pointed downward so that it will not collect water.
This vent should be free of dirt, grease, bugs, etc.
• The gas connections supplied with your Weber
appliance have been designed and tested to meet
100% of CSA and ANSI requirements.
m WARNING: Replacement LP cylinders
must match the regulator connection
supplied with this Weber
appliance.
2
1
2
1
1 Type 1 Valve
2 Hand Wheel
3
External Thread
® gas grill and the
® gas
® gas
gas
®

TYPE 1 CONNECTIVE COUPLING

3
3
4
5
5
4
4 5
Thermally Sensitive Nut
Propane Regulator
WWW.WEBER.COM
®
11