Connection For Playing Music - Yamaha NX-B55 Owner's Manual

This unit enables you to enjoy music playback wirelessly with a Bluetooth device (such as mobile phones, computers, portable players, etc.) by pairing
(registering) with the device and establishing a Bluetooth connection with this unit.
Within 10m
(33 ft)
Pairing (Registration)
Pairing must be performed when using Bluetooth connection for the first time or if pairing data has been deleted. Pairing can be done within about 5
minutes after the power is turned on.
Power
On
b Press p (power)
a Turn on the
power of the other to turn on this unit.
device you want to
pair with.
5
En

connection for playing music

Within about 5 minutes
On
NX-B55 Yamaha
c Operate the other device to
search Bluetooth devices
within about 5 minutes after
turning on this unit.
d Select "NX-B55 Yamaha"
from the search results of the
other device. If you are
prompted to input a passkey,
input "0000".
e Check the pairing is
completed by the other device.
Notes
• Install in a stable place.
• Do not place on top of steel or other metal.
• Do not cover with a cloth, etc.
• Install in the same room where the device is with which signals are to be
exchanged (Bluetooth profile A2DP compatible portable music player, mobile
phone, etc.) within a direct, maximum line-of-sight distance of 10 m (33 ft).
• Make sure there are no obstacles between this unit and the Bluetooth device.
What is pairing?
Pairing is the operation to register a device (hereafter referred to as "other device")
for Bluetooth communications. Follow the steps described on the left to pair.
Notes
• Check that the pairing process on the other device has been completed. If the
pairing process fails, start over from step b. For details, see the other device's
operating instructions.
• If the power supply to this unit is cut off during the pairing operation, the pairing
data may be damaged. If so, perform the steps described in "Clearing all the
pairing data" and then perform pairing again (☞ page 7).
• This unit can be paired with up to 8 other devices. When pairing is conducted
successfully with the 9th device and the pairing data is registered, the pairing data
of the other device which is the least recently connected to this unit, is cleared.