JVC AV-32360 Service Manual page 29

Measuring
Item
instrument
WHITE Signal
BALANCE generator
(High Lig ht)
adjustment
Remote
control unit
***
HIGH LIGHT adjustment
DRIVE ADJUSTMENT
R DRIVE (S14)
B DRIVE (S15)
SUB BRIGHT Remote
adjustment control unit
SUB Remote
CONT RAST control unit
adjustment
Test point Ad justment item
HIGH LIGHT
[SERVICE MENU]
R DRIVE(S14)
B DRIVE(S15)
Variable Initial setting
range value
0 ～ 127
64
0 ～ 127
64
S01 BRIGHT
S02 PICT URE
No. 51950
Description
1. Receive the NTSC black and white s ignal (c olor off).
2. Select the HIGH LIGHT mode in the SERVICE MENU.
3. Confirm the initial setting value of "G DRIVE" and "B DRIVE".
4. If they are differ, s et the S14 and S15 to the c orrect initial
setting value in the 1 V/C(S) mode.
5. Adjust the screen c olor to white with the ④ ④ ④ ④ , ⑥ ⑥ ⑥ ⑥ , ⑦ ⑦ ⑦ ⑦ and ⑨ ⑨ ⑨ ⑨
keys of the remote control unit.
Remo te Cont rol Unit
H.LINE ON H.LINE OF F
1
R DRIVE
4
R DRIVE
7
"
White balance (low light and high light) adjustment should be
done.
1. Receive a NTSC broadcast.
2. Select the 1 V/C(S) mode from SERVICE MENU.
3. Select S01 BRIGHT of the V/C(S) mode in SERVICE MENU.
4. Confirm the initial setting value of the S01 BRIGHT.
5. If the brightness is not the best with the initial setting value,
make fine adjustment of the S01 BRIGHT until you get the
optimum brightness .
BRIGHT ADJUSTMENT
S01 BRIGHT
"
Bright adjustment should be done.
1. Receive a NTSC broadcast.
2. Select S02 PICTURE of the V/C(S) mode in SERVICE MENU.
3. Confirm the initial setting value of the S02 PICTURE.
4. If the contras t is not the bes t with the initial s etting value, make
fine adjustment of the S02 PICTURE until you get the optimum
contrast.
PICTURE
ADJUSTMENT
S02 PICT URE
AV-36360 AV-36S36
AV-36330 AV-36S33
AV-36320
EXIT
3
2
B DRIVE
6
5
B DRIVE
9
8
Variable Initial setting
range value
0 ～ 127
64
Variable Initial setting
range value
0 ～ 127
55
29