Connect To A Director; View Or Change Network Settings - Control 4 Rroom-based control system User Manual

Connect to a Director

To access your system, you must be connected to a Director. To
connect to a Director (or to change Directors in order to switch the
system your Navigators are accessing), do the following:
1.
From the Main menu, select Info.
The Info options bar or list is displayed.
2.
From the Info options, choose the Director button. The
Connect to a Director screen appears.
3.
In the Connect to a Director list of IP addresses, highlight
your controller's IP address and select Connect.

View or Change Network Settings

From the Network Settings screen, you can view or change IP address
settings, DNS server settings, or wireless settings.
NOTE: The default IP configuration is DHCP Client. This
default setting assumes that your network system has a device
serving as the DHCP Server, such as a network gateway,
switch, or router. If there is not a DHCP server in the network,
you will need to choose another option.
To view or change the network IP settings, do the following:
1.
From the Info options, choose the Network button. The
Network screen is displayed.
89