Check Or Change Security Settings - Control 4 Rroom-based control system User Manual

NOTE: Supported Switch settings are on and off only.
Dimming levels apply only to dimmers.

Check or Change Security Settings

NOTE: .The Security interface displayed depends on the
installed security system. Use the steps provided here as a
guideline for exploring your model-specific security options.
1.
At the top of the page, click Security.
2.
Click Toggle: Keypad slide-down tab to obtain model-
specific instructions or options. For example, some users
are prompted at this point to enter a security code and click
OK in order to view their model-specific interface.
3.
In your model-specific interface, click an option on the
screen to select the option (like an option at the LCD of the
local security panel). For example, the following screen
provides the options Stay, Away, Arm with Code, and
Disarm with Code (among other options). The text in this
example (Ready to Arm) is the same text viewable on the
LCD of the local security panel.
95