Set Preferences For Remote's Lcd; View Part Number Or Mac Address - Control 4 Rroom-based control system User Manual

If none of your buttons have custom programming, you'll
only wake up the LCD and display the name of the current
room.

Set Preferences for Remote's LCD

1.
Press the LCD/List button.
2.
Select Info > Config to set LCD display preferences or view
the battery level:
Set Brightness: Use the arrows to move slider bar to
brighten or dim display.
Set Contrast: Use the arrows to move slider bar to
increase or decrease contrast.
Set LCD Backlight: Use the arrows to choose a
Backlight option:
View current battery level: Battery level is displayed.

View Part Number or MAC Address

To view the remote control part number and MAC address:
1.
Choose Info > About to view the remote control part
number and MAC address.
2.
Press Cancel to exit the LCD navigator.
NOTE: You can access the preferences view on any Control4
interface to adjust brightness, screensavers, backlight options,
etc.
On (comes on with every button-press)
Off (never comes on)
LCD Navigator Only (only comes on when the
remote control's LCD menu is used)
13