13. Note that both parts are still connected with the flex foils.
15. Now the parts can be separated.
17. The SHIELD LID can be lifted up easily.
Page
22
(44)
CONFIDENTIAL
Copyright © 2007 NOKIA. All rights reserved.
14. Disconnect both flex connectors. For complete removal of
these flex foils the upper block must be disassembled, too.
16. Lift up the C-COVER now.
18. Use appropriate soldering jig or at least the C-COVER as
support when replacing the CAMERA MODULE.
60 Navigator RM-22
Service Manual Level &2
ISSUE 4