Pairing To A Trf-Ge1 And/Or Mrx-20 - Universal Remote TRG-100 Owner's Manual

TRG-100 U R
MOTION EMOTE

Pairing to a TRF-GE1 and/or MRX-20

Before you can begin to use the TRG-100 Umotion remote, it is
necessary to pair it with either a TRF-GE1 Extender or the MRX-20
Advanced System Controller. To pair, press and hold the Main and
Sel buttons for three seconds. Once paired, the Umotion button
will flash three times. Keep in mind, a TRG-100 remote can only be
paired with one MRX-20/TRF-GE1 at a time. If it is paired with a
new MRX-20/TRF-GE1, it will no longer work with the previous
setup.
Press and hold
Main and Sel for
three seconds.
Once paired, the
Umotion button
will flash three
times.
Page 5