Event > Event Settings; Event - Vivotek FE8180 User Manual

VIVOTEK
Event > Event settings
This section explains how to configure the Network Camera to respond to particular situations
(event). A typical application is that when a motion is detected, the Network Camera sends
buffered images to an FTP server or e-mail address as notifications. Click on Help, there is
an illustration shown in the pop-up window explaining that an event can be triggered by many
sources, such as motion detection or tampering detection. When an event is triggered, you can
specify what type of action that will be performed.

Event

An event is an action initiated by a user-defined trigger source. In the Event column, click Add to open
the event settings window.
96 - User's Manual