Vivotek FE8180 User Manual page 162

VIVOTEK
7.23 camera PTZ control(Not used in
FE8174/FE8173/FE8181/FE8180)
Group: camctrl (capability.camctrl.httptunnel > 0)
NAME VALUE
enablehttptunnel <boolean>
Group: camctrl_c<0~(n-1)> for n channel product
NAME
panspeed
tiltspeed
zoomspeed
focusspeed
patrolseq
patroldwelling
preset_i<0~(npreset-1
)>_name
preset_i<0~(npreset-1
)>_ dwelling
uart
cameraid
isptz
disablemdonptz
162 - User's Manual
DEFAULT
0
VALUE DEFAULT
-5 ~ 5 0
-5 ~ 5 0
-5 ~ 5 0
-5 ~ 5 0
string[120] <blank>
string[160] <blank>
string[40] <blank>
0 ~ 999 0
0 ~ (m-1), m 0
is UART count
0~255 1
0 ~ 2 0
<boolean> 0
SECURITY
(get/set)
4/4
(capability.ptzenabled)
SECURITY DESCRIPTION
(get/set)
1/4 Pan speed
1/4 Tilt speed
1/4 Zoom speed
1/4 Auto focus speed
1/4 (For external device)
The indexes of patrol points,
separated by ","
1/4 (For external device)
The dwelling time of each patrol
point, separated by ","
1/4 Name of the preset location.
1/4 The dwelling time of each preset
location
1/4 Select corresponding uart
(capability.nuart>0).
1/4 Camera ID controlling external PTZ
camera.
1/4 0: disable PTZ commands.
1: enable PTZ commands with PTZ
driver.
2: enable PTZ commands with UART
tunnel.
1/4 Disable motion detection on PTZ
operation.
DESCRIPTION
Enable HTTP tunnel for camera
control.