Advertisement
If you are experiencing a problem with your monitor do not return the unit to
your point of purchase, please contact us on: 1300 667 137 for any
assistance and after sales service.
Problem
Receiver is not turned on.
Receiver's Unit
has no sound /
Volume is too low.
picture or static
Channel switches are not
on the setting (1,2 or 3).
Signal interference due to
microwaves, monitors,
mobile or cordless
telephones, etc...
Out of range.
Power/low battery
Batteries are low.
indication is amber
Receiver's Unit is not
Receiver's Unit
turned on.
power indication
not on
Batteries too low/are
dead/Power is turned off.
AC Adapter not properly
connected.
10
www.childcareproducts.com.au
Problem Solving
Solution
Possible Cause
Turn Receiver on at the
side of the Receiver's Unit.
Adjust the volume control
on the Reciever's Unit.
Check the channel
switches on the
Transmitter's Unit and
Receiver's Unit to confirm
they are on the same
channel (1,2 or 3).
Try one of the other
channels.
Bring Receiver's Unit
closer to Transmitter's
Unit.
Recharge batteries.
Turn the volume on/off
the side of th Receiver's
Unit to the ON position.
Charge battery / Make
certain that any light
switches that control
the power flow to the
wall outlet are on (when
using AC). If batteries
are dead, replace
batteries.
Check AC Adapter
connections.
A
Transmitter (baby's unit)
3
4
7
8
A
T R A N S M I T T E R U N I T ( B A B Y ' S U N I T )
A-1 Power LED-----------------------------------------
A-2
IR LED----------------------------------------------
A-3
Camera lens--------------------------------------
A-4
Brightness sensor-------------------------------
A-5
Microphone----------------------------------------
A-6
Channel 1-2-3------------------------------------
A-7 Power on/off---------------------------------------
A-8 DC Power (9V)------------------------------------
A-9
Wall hook hole-----------------------------------
www.childcareproducts.com.au
1
2
5
6
9
lights when unit is switched on.
Infra-red night vision sensors.
high-sensitivity camera lens.
automatically switches on night
vision in the darkened room.
high-sensitivity microphone.
select channel 1, 2 or 3 (whichever
has less interference).
switches off power to the unit.
power input socket.
can be mounted to a wall.
3
Advertisement
