SAFETY PRECAUTIONS Read all instructions before assembly and use of the Smart Baby Monitor. Keep instructions for future use. WARNING STRANGULATION HAZARD: CHILDREN HAVE STRANGLED IN CORDS. KEEP THIS CORD OUT OF THE REACH OF CHILDREN (MORE THAN 1M AWAY). NEVER USE EXTENSION CORDS WITH AC ADAPTERS.
Page 3
CONGRATULATIONS Congratulations on your purchase of the Smart Baby Monitor This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference.
Page 4
ASSEMBLY CONTENTS Check what you have received... You have received 1 box. Please check the contents of the box against the list below. If anything is missing, please contact Customer Service. In Australia, contact CNP Brands on 1300 667 137. Supplied loose in box: Smart Baby Adapter...
Page 5
ASSEMBLY CONTENTS Overview of Smart Baby Monitor: 1. Micro-SD Card Slot - accepts 6. Light Sensor (for night mode up to 32GB detection) 2. Infrared LEDs (for night vision) 7. Power Socket 3. Microphone 8. PAIR Button 4. Camera Lens 9.
GETTING STARTED INSTRUCTIONS 1. Getting Started SD card installation As an option, the Unit provides video recording on up to 32GB microSD card (NOT PROVIDED) when image motion is detected. Insert the microSD card into the SD slot as shown. Connecting the Power Supply for the Unit •...
WI-FI® INTERNET VIEWING 2. Wi-Fi® Internet Viewing Minimum System Requirements Android™ System • Version 7.0 or above iPhone®/iPad® iOS • Version 10.0 or above High Speed (Wi-Fi®) Internet • At least 0.6 Mbps upload bandwidth per camera (you can test your internet speed on this site: http://www.speedtest.net) Getting started - Connecting Devices How does it work?
WI-FI® INTERNET VIEWING Status of LED Indication: Pair / Setup state: LED is flashing in Red and Blue alternately. Unconnected state: LED is Red and Flashing. Connected state: LED is Blue and always on. Video streaming: LED is Blue and Flashing. Note: You can only setup via a compatible smartphone or tablet and not via a PC.
WI-FI® INTERNET VIEWING • you agree to our terms of service before tap Done (fig. 2), enter your account information to sign up with Hubble. Note: If you already have a Hubble App account, please tap Log in with Hubble to go to the next steps. fig.
Page 10
WI-FI® INTERNET VIEWING fig. 3 fig. 4 • To select your device for setting up by tapping Baby Monitoring (fig. • Tap Smart Baby Camera to add the new camera (fig. 6). fig. 5 fig. 6 • The following setup instructions will appear on the screen, select your Wi-Fi network and enter “Password”...
Page 11
WI-FI® INTERNET VIEWING fig. 7 fig. 8 • Press and hold the PAIR button at the back of Camera, you will hear a voice prompt “Ready for Pairing” then tap Continue. (fig. 9) fig. 9 • Tap Generate QR code on your device (fig. 10) and hold the QR code 15 to 30 cm in front of Camera to get scanned till you will hear confirmation message “...
Page 12
WI-FI® INTERNET VIEWING fig. 10 fig. 11 • It will take a few minutes for the Camera to connect to the Wi-Fi® network before showing the connection status (fig. 12). • The Camera has been successfully connected, name your Camera (fig. 13).
Page 13
WI-FI® INTERNET VIEWING fig. 12 fig. 13 • If connection fails, please tap Retry and repeat the steps starting from 3.4.4.
PROCEDURE FOR RESETTING THE CAMERA 3. Procedure for Resetting the Camera Note: If your Camera is moved from one router (e.g. home) to another (e.g. office) or you have Camera setup issues, then the Camera must be reset. Please reset the Camera with the following procedures: •...
CLEANING 4. Cleaning Clean the Unit with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the product with thinners or other solvents and chemicals –...
Page 16
HELP 5. Help Noise interference on your device • To avoid background noise or echoes, ensure that there is enough distance between your device and the Wi-Fi® Camera Unit. • Use of other 2.4 GHz products, such as Bluetooth™ systems or microwave ovens, may cause interference with this product.
Page 17
CLEANING Troubleshooting for Wi-Fi ® Internet Viewing Category Problem Solution Description / Error Account I am unable to Please check your user name login even after and password. registration. Account I receive an error Please ensure that you have message saying: registered with us.
Page 18
HELP Viewing When I am in When you are accessing your “remote mode”, the Camera Camera via a network different video stops after 5 from your home network (over minutes. How do I the internet) your video times out view for longer? after 5 minutes.
TROUBLESHOOTING General What is the The LED indicates the following significance of the status: camera LED? LED flashing Red: Your Camera is booting up. After a voice prompt the camera is booted up and ready for pairing. LED Cycling Blue/Red: Your camera is in pairing mode.
Page 20
TROUBLESHOOTING General What is the When you are accessing your meaning of “Local Camera from the same wireless Camera” and network (Home) in which it is “Remote Camera”? configured, it is a Local Camera. When you are accessing your Camera away from your home it is a Remote Camera.
TECHNICAL SPECIFICATIONS Features How many users If you are accessing in Local can access the Mode, two users are supported, Camera at one after two users all streaming will time? go through the remote server. This allows for unlimited user access to a single Camera at one time.
WARRANTY 6. Standard Warranty 1. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if goods fail to be of acceptable quality and the failure does not amount to a major failure.
Page 23
WARRANTY discretion. The extent of any repair will be to rectify any defect in workmanship and materials or to ensure that the product complies with the manufacturer’s specifications. 5. To make a claim under this Standard Warranty you will need to: a.
Page 24
These include distribution lines for Joovy, Lascal, Maclaren, Project Nursery, Summer Infant and Yookidoo. Our own brands, including Childcare, have gone from strength to strength in recent years. Childcare, and our premium brand bebe care, demonstrate our commitment to quality and continuing...