Accessories
Remote Control
(p. 10)
●
N2QAYB000825
Pedestal
(see below)
●
Accessories may not be placed all together. Take care not to throw them away unintentionally.
●
For the information of optional accessories, refer to [eHELP] (Support > Optional accessories).
Assembling / Removing the pedestal
Assembly screw (4)
M5 × 16
Assembly screw (4)
M4 × 25
■
Assembling the pedestal
1
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking
the TV.
1 Remove the assembly screws
2 Pull out the pedestal from the TV.
3 Remove the assembly screws
th_32_39ev_xv6gkmx_1075.indb 5
th_32_39ev_xv6gkmx_1075.indb 5
Batteries (2)
Mains lead
●
R6
(p. 6)
(p. 10)
(XV6G series) (EV6G series)
(XV6K series) (EV6K series)
Operating Instructions
A
C
D
2
Secure the base as shown below to prevent the TV
from falling over.
●
The place where the base is secured should be thick
enough and made of hard material.
from the TV.
from the bracket.
5
(XV6M series)
(EV6M series)
(EV6X series)
Bracket
Base
B
3
Commercially available screw
(not supplied)
Diameter: 3 mm
Length: 25 - 30 mm
1/25/2013 6:09:47 PM
1/25/2013 6:09:47 PM