Call Restriction; Call Forwarding - Nokia N95 User Manual

Anykey answer — Select On, and you can answer an
incoming call by briefly pressing any keypad key, except
, , , and
Line in use — This setting (network service) is shown only
if the SIM card supports two subscriber numbers, that is,
two phone lines. Select which phone line you want to use
for making calls and sending text messages. Calls on both
lines can be answered irrespective of the selected line. If
you select Line 2 and have not subscribed to this network
service, you will not be able to make calls. When line 2 is
selected, is shown in the standby mode.
Tip! To switch between the phone lines, press and
hold in the standby mode.
Line change — To prevent line selection (network service),
select Disable if supported by your SIM card. To change
this setting, you need the PIN2 code.

Call forwarding

Call forwarding allows you to forward your incoming calls
to your voice mailbox or another phone number. For
details, contact your service provider.
Select which calls you want to forward and the desired
forwarding option. To forward voice calls when your
number is busy or when you reject incoming calls, select
busy. Set the option on (Activate) or off (Cancel), or check
whether the option is activated
108 Copyright © 2007 Nokia. All rights reserved.
.
(Check status).
Several forwarding options can be active at the same time.
When all calls are forwarded,
standby mode.
Call restrictions and call forwarding cannot be active at
the same time.

Call restriction

Call restriction (network service) allows you to restrict the
calls that you make or receive with the device. To change
the settings, you need the barring password from your
service provider.
Select the desired restriction option, and set it on
(Activate) or off (Cancel), or check whether the option is
active (Check status).
including data calls.
Call restrictions and call forwarding cannot be active at
the same time.
When calls are barred, calls may be possible to certain
official emergency numbers.
Network
Your device can automatically switch between the GSM
and WCDMA networks. The GSM network is indicated with
If
in the standby mode. The WCDMA network is indicated
with .
is shown in the
Call restriction affects all calls,