Download  Print this page

Connections; Connecting A Tv; Connecting An Mp3 Player; Connecting Tv - Bush CBAR4 Installation & User's Instructions

2.1 ch 100w sound bar
Hide thumbs

Advertisement

User Instructions

Connections

Connecting a TV

The below diagram shows the connection
to a TV, DVD or GAMES CONSOLE using the
supplied RCA - RCA audio cable.
1. Connect one end of the RCA cable (supplied)
to the TV, DVD or CONSOLE audio output RCA
sockets.
2. Connect the other end to the TV inputs on the
side of the Sound bar (7).
NOTE: Take care to match the RED plug to the
RED socket and the WHITE plug to the WHITE
socket.
The below diagram shows the connection to
a TV using the supplied RCA - 3.5mm audio
cable.
1. Connect the 3.5mm (small) end of the cable
(supplied) to the TV headphone 3.5mm audio
output socket.
2. Connect the other RED & WHITE ends to the TV
inputs on the side of the Sound bar (7), taking
care to match the RED plug to the RED socket
and the WHITE plug to the WHITE socket.
NOTE: In some cases the Sound bar volume output
is effected by the volume level on the TV. In this
case adjust the TV volume to increase the audio
output from the sound bar.
NOTE: If no sound can be heard from the sound
bar using this connection, you may need to check
your TV settings to enable the headphone socket
output.

Connecting an MP3 player

The below diagram shows the connection to
an audio device such as an MP3 player, using a
3.5mm audio cable (not supplied).
1. Connect one end of the 3.5mm audio cable to the
headphone output of your MP3 player.
2. Connect the other end to the AUX input (3.5mm
socket) on the side of the Sound bar (8).
4

Hide quick links:

Advertisement

Table of Contents
loading

  Related Manuals for Bush CBAR4