Safety 1st Babycool Instructions For Use & Warranty page 8

1
Cover
2
Belt clamp
3
Belt guard door
4
Hooks for lap belt
5
Shell
6
Belt yoke
7
Base
8
User instruction sticker
9
ECE hallmark
10
Instruction manual
11
Belt slots
12
Belt pads
13
Belt buckle
14
Release button
15
Adjuster belt
16
(Shell) Positioning handle
17
Shoulder belt
18
Belt hooks
Safety
• All Safety 1st products have been carefully designed and tested for your baby's safety and comfort. Use only accessories sold
or approved by Safety 1st.
• Using other accessories may prove to be dangerous.
• Please read these instructions carefully and make yourself familiar with the child seat before using it.
• Always keep the instructions for future reference; there is a storage compartment specifically provided on the child seat.
Universal System with a 3 point seat-belt:
• Approved model ECE R44/04
• For Group 1 seats (babies from 9 to 18kg) the seat must be fitted forward facing in the rear of the vehicle. Move the front seat
of the car forward as far as possible so that the baby does not hit it.
• The manufacturer's liability is limited to what is covered under the European Regulation (R44/04). This approval does not
remove the necessity for care and respect for the Highway Code.
• After putting the child in the car seat, ensure that the car seat-belt is sufficiently taut by pulling the belt. Ensure also that the
belt does not become twisted
The Safety 1st Baby Cool and your baby:
• Never leave a child unsupervised.
• Never leave your child alone in the vehicle.
• Even a gentle impact on a vehicle can turn a child into a projectile.
• For your own safety and that of your child, always put the child in the child car seat, however short your journey may be.
• Ensure that the straps under the stomach lie as low as possible, to properly support the pelvis.
• The temperature inside a vehicle may become very high, particularly after a long period of exposure to the sun. It is strongly
recommended, under such conditions, to cover the seat of the car with a piece of material or something equivalent to prevent
the harness fixings, and in particular the metal parts, from becoming hot and burning the child.
Safety 1st Baby Cool car use
• This device should be used only on approved vehicles equipped with 3 point/static/inertia reel seat-belts that are approved in
accordance with EEC/UN regulation N° 16 or other equivalent standard.
• Facing forward, the child seat must be placed on the rear seat of the vehicle or exceptionally on the front seat depending on
the current legislation in the country of use.
• This child restraint is effective only if the instructions for use are respected.
• Always fasten the child restraint even when the child is not sitting in it.
• The user must always check that any luggage and other objects likely to cause injury to the occupant of the car seat in the
case of impact are properly secured.
• Never place heavy objects on the rear parcel shelf, to avoid the danger of projectiles in the event of an accident.
• The rigid parts and the plastic sections of a child restraint device should be positioned and installed in such a way that they
cannot, when the vehicle is being used under normal conditions, become trapped under a moving seat
or in the vehicle door.
EN
0529024_DRU1219A14_Manual_Babycool_S1st_2014_A5.indd 8
8
24/10/13 17:27