Lenovo ThinkStation P300 User Manual page 120

5. Pull the blue handle to release and remove the hard disk drive from the drive cage.
Figure 72. Removing the primary hard disk drive
6. Flex the sides of the blue bracket to remove the hard disk drive from the bracket.
7. To install a new hard disk drive into the blue bracket, flex the bracket and align pin
and pin 4 on the bracket with the corresponding holes in the hard disk drive. Do not touch the circuit
5
board on the bottom of the hard disk drive.
Figure 73. Installing the hard disk drive into the bracket
108
ThinkStation P300 User Guide
1 , pin 2 , pin 3 ,