Recording - Inter-m DSR-430 Operation Manual

3-1. RECORDING

Save 'recording set' as channels.
- Channel : Choose the channel [choice options: 1~4]
- Resolution : Choose a recording resolution of a channel chosen
- Resolution : (Choice options: NTSC 704X240, 352X240 / PAL 704X288, 352X288)
- Quality : Choose a recording quality of a channel chosen.
- Quality : (Choice options : minimum/low/middle/high/maximum)
- FPS : Set a recording framerate of a channel chosen per a second.
- FPS : Maximum recording frame at 704x240 is 15FPS per a second for NTSC and 704x288 is 12.5FPS per
- FPS : a second for PAL.
- Recording Time After a Motion Detection : Set a recording time after a motion occurs.
- Recording Time After a Sensor Occurrence : Set a recording time after a sensor occurs.
- Sensor Connection : Choose a sensor linked a channel chosen.
- Sensor connection: (according to the sensor chosen occurs sensor recording and alarm output)
* Sensor Recording isn't made if you do not choose a connection of Sensor of the 'REC' Field in spite of a sensor
recording is set to the 'SCH' Field and it starts to work .
- Confirmation/Cancellation : After set a channel, press 'OK' or 'ESC'.
[picture 3-2]
STAND ALONE DVR
15
DSR-430