e.
WWAN module (see
f.
Keyboard (see
g.
Top cover (see
h.
System board (see
i.
Heat sink (see
Remove the processor:
1.
Position the system board upside-down.
2.
Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn
counterclockwise until you hear a click.
3.
Lift the processor (2) straight up and remove it.
NOTE:
the processor slot when you install the processor.
Reverse this procedure to install the processor.
78
Chapter 4 Removal and replacement procedures
WWAN module on page
Keyboard on page
Top cover on page
System board on page
Heat sink on page
The gold triangle (3) on the processor must be aligned with the triangle embossed on
50)
54)
56)
71)
73)