Samsung PL42E7SX/RCL Service Manual page 13

11-1-3 Remote Control (PL-42E7S/PL-42E71S)
Samsung Electronics
1 POWER
Turns the TV on and off.
2 NUMERIC BUTTONS
Press to change the channel.
3 –
Use to select a channel over 100.
For example, for channel 122,
press "-", then "2", then "2".
4 CH MGR
Used to display Channel Lists on the
screen.
5 TV
Selects the TV mode directly.
+ VOL –
6
Press to increase or decrease the
volume.
7 MUTE
Press to temporarily cut off the sound.
8 MENU
Displays the main on-screen menu.
9 S.MODE
Press to select the sound mode.
10 PIP
Picture-in Picture ON/OFF.
11 P.MODE
Press to select the picture mode.
12 E.SAVING
Adjusts screen brightness to save energy.
13 DNIe (Digital Natural Image engine)
Activates DNIe Demo mode.
14 MTS
Press to choose stereo, mono or
Separate Audio Program
(SAP broadcast).
15 SRS
Selects SRS TruSurround XT mode.
16 SOURCE
Press to display all of the available
video sources.
This is a special remote control for the visually impaired, and has Braille points on the Power,
Channel and Volume buttons.
Operation Instruction & Installation
17 PRE-CH
Tunes to the previous channel.
18 SLEEP
Press to select a preset time interval for
automatic shut off.
19 PC
Selects the PC mode directly.
20 CH
Press to change channels.
21 EXIT
Press to exit the menu.
22 UP / DOWN / LEFT /
RIGHT / ENTER
Use to select on-screen menu items
and change menu values.
23 INFO
Press to display information on the TV
screen.
24 CAPTION
Controls the caption decoder.
25 STILL
Press to stop the action during a
particular scene.
Press again to resume normal video.
26 P.SIZE
Press to change the screen size.
27 SOURCE
Press to select a signal from an
external source in PIP.
28 CH
Displays the available channels in
sequence. (These buttons change
channels in the PIP window only.)
29 POSITION
Change the position of the PIP screen.
11-3