Belt Clip & Optional Headset - AT&T E560-1 User Manual

91-000341-030-000-E560-1 Manual July.11,05.qxd
Belt clip & optional headset
Install belt clip as shown below if desired.
For hands-free telephone conversations, you can use any industry
standard 2.5 mm headset (purchased separately). For best results
use an AT&T 2.5 mm headset.
Snap belt clip into notches on
side of handset. Rotate and pull
to remove.
Plug 2.5 mm headset
into jack on side of
handset (beneath
small rubber cap)
6
2/13/1950 7:21 PM Page 8