Bernina 1100 Series Owner's Workbook page 5

1100 series;
Table of Contents

Advertisement

M
ASTERING
Y
OUR
BERNINA
®
• Threading Order
- First – Upper Looper (Blue)
- Second – Lower Looper (Red)
- Third – Right Needle (Green)
- Fourth – Left Needle (Yellow)
• Upper Looper – Owner's manual pg.___
• Lower Looper – Owner's manual pg.___
- Rotate the handwheel to bring the looper to the right before engaging the automatic looper threader
• Right Needle -– Owner's manual pg.___
- Set positioning lever of the needle threader to "R" (1100DA only).
• Left Needle – Owner's manual pg.___
- Set positioning lever of the needle threader to "L" (1100DA only).
Test Sewing
Owner's manual pg.___
• Lift the front of the presser foot to place the fabric under it to begin serging.
• Lift the entire presser foot by the handle at the back when accurate fabric placement is needed.
• Use the 2-step presser foot lifter for thick fabrics.
• Chain off the fabric.
• Use the thread cutter to cut the thread chain.
Cleaning and Oiling
Owner's manual pg.___
• Clip all threads at the thread guide support.
• Lift the presser foot to release (open) the thread tension disks.
• Gently pull threads from serger. Always remove threads in the direction of sewing. If you encounter any
resistance, stop and rotate the handwheel slightly to release the threads from the loopers.
• Open the looper cover; rotate the upper knife up.
• Using a vacuum cleaner adapter or a 1" cosmetic brush, remove all lint and fluff from the looper, knife
and feed dog areas of the machine.
• Following the oiling guide inside the looper cover, place a drop of oil on each of the two oiling points.
• Remove old needles and replace them with new.
• Rotate upper knife down into cutting position.
Replacing the Knives
Owner's manual pg.___
• Serger knives cut fabric as it is serged; as with scissors, repeated use can dull them. If knives begin to
"chew" instead of cut, consider replacing the lower knife.
• If you serge over pins, replce both knives.
• An authorized BERNINA
BERNINA
M
Y
ASTERING
OUR
®
technician will need to replace the upper knife.
1/04/02
®
BERNINA
®
1100 Series
1100 Series/5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1100da

Table of Contents