Manual Tuning - Intempo Digital PG-01 Instruction Manual

Manual tuning

As well as an auto tune function you can
manually tune the receiver, this can help you
when aligning your aerial or when adding
stations that were missed while auto tuning.
Press and hold the "Select" key for approximately
2 seconds, the LCD display will now show
"Manual tuning". Now use the "Up" & "Down"
keys to move through the DAB channels which
are numbered from 5A to 13F.
DAB CHANNELS
5B
5A
When the receiver locates an
ensemble/multiplex on one of the DAB channels
it will display this on the bottom line of the LCD.
Now press the "Select" key to enter the current
ensemble/multiplex, the top line will now display
the first station in the ensemble/multiplex.
To see what stations are present on the found
ensemble/multiplex just press either the "Up" or
"Down" key. When you've located a station that
you would like to listen to just press the "Select"
key.
Once you have reached the last station in the
found ensemble it will revert back to the first
station again. If you wish to exit the manual
tuning mode press the "Select" key.
Switching from DAB to FM
In order to switch the radio from DAB to FM mode
you need to press the "DAB/FM" key once. The
display will show "Switching to FM", the radio will
then automatically tune to the nearest station.
Switching to FM
On the top line of the display is the current
station name or frequency if the RDS (radio data
system) isn't available.
97.40MHz
13F
Autotune
To search for a FM station you need to press
and then release the "Autotune" key, this will
start scanning up the frequency band. To scan
down the frequency band press and hold the
"Autotune" key for around 1 second. Once a
station has been found the scanning will stop
automatically. If no station is found then the
tuning will stop once it's cycled through the entire
FM band (87.5-108MHz).
Presets
When you have tuned to a station that you would
like to store as a preset then just press and hold
one of the preset keys (1-4) for 2 seconds. The
display will then show "Preset # stored".
In order to recall one of your saved presets just
press and release the corresponding preset key.
If no station has allocated to a preset key then it
will display "Preset # empty".
FM Mode
FM