Sleep Mode; Factory Reset; System Reset - Intempo Digital PG-01 Instruction Manual

Table of Contents

Advertisement

Sleep Mode

This function allows you to programme the radio
to switch itself off after a set period of time. To
activate the sleep function press the "Sleep" key.
The display will show one of the states shown
below. Every time you press the "Select" key it
will move onto the next step in the cycle.
Sleep Status
off
Sleep Timer Set
30 min
Sleep Timer
on
Now press the "Select" key until the "Sleep
Timer Set" is displayed. To alter the sleep time
press the "Up" or "Down" keys. When you have
finished setting the sleep time press the "Select
key". The display will change to "Sleep status
ON". To exit either press the "Sleep key" or
don't press any key for about 4 seconds and the
display will return to standard radio operation.
The sleep time is now set.
Once the sleep time has expired the radio will go
into standby. To switch the radio back on press
the "Standby" key.
If you have set the sleep time but you wish to
cancel it press the "Sleep" key. You will see on
the display "Sleep Timer On. " If you now press
the "Select" key once it will display "Sleep
Status OFF. " Press either the "Sleep" key or
don't press any key for about 4 seconds and the
display will return to standard radio operation.
30 min

Factory Reset

There may be times when you need to reset
your receiver back to its original factory settings
i.e. when you move the radio to another part of
the country so that you can pick up the local &
national DAB stations in that area. If you don't do
this then when you select a station on the radio it
may no longer be available.
Reset procedure
Unplug the power lead from the rear of the radio,
then reconnect it. Once you see the "Welcome
Intempo Digital" logo press and hold the
"Select" key. When you see "System reset"
then release the "Select key".
Please note that once the reset has taken place
you will lose all of your stored presets both DAB
& FM, and the internal DAB registry.
Welcome
Intempo Digital

System reset

PRESS AND
HOLD THE
SELECT KEY

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents