Advertisement

PG-01instruction manual
DIGIT AL RADIO

Advertisement

Table of Contents
loading

Summary of Contents for Intempo Digital PG-01

  • Page 1 PG-01instruction manual DIGIT AL RADIO...
  • Page 2 fairbank house ashley road altrincham WA14 2DP united kingdom +44 (0)161 924 0300 +44 (0)161 924 0319 sales @ intempodigital.com www.intempodigital.com...
  • Page 3: Control Panels

    PG-01 User Manual Accessories • Intempo Digital radio • Telescopic aerial • External power supply • Warranty card Control panels AUTO TUNE DAB/FM SELECT STAND BY USER PRESETS 1-4 LCD DISPLAY ALARM SLEEP DOWN INFO VOLUME CONTROL Inputs/Outputs Aerial, headphone socket 3.5mm, & DC power socket.
  • Page 4 Switching your Intempo-digital radio on for the first time Connect the external power adapter to the radio During scan mode the LCD will display a slide and plug the other end into mains outlet. bar that indicates the progress of the scan and the amount of radio stations that have been found so far.
  • Page 5: Display Modes

    Autoselect Display modes Instead of having to press the “Select” key after you have found a station that you would like to INFO KEY listen to you can set the radio so that as you scroll through the stations you listen to each one in turn.
  • Page 6: Signal Strength

    Ensemble/Multiplex Advanced display modes (Group name) A multiplex/ensemble is a collection of radio To enter the advanced display mode you need to stations that are bundled and transmitted on one press and hold the “Info” key for approximately frequency. There are national and local 3 seconds then release it.
  • Page 7: Manual Tuning

    Manual tuning FM Mode As well as an auto tune function you can Switching from DAB to FM manually tune the receiver, this can help you when aligning your aerial or when adding In order to switch the radio from DAB to FM mode stations that were missed while auto tuning.
  • Page 8 Display modes Time and date Every time you press the “Info” key the display The broadcaster provides clock and date will cycle through the following display modes:- information automatically so there’s no need to mess around manually setting the clock. In the unlikely event that the broadcaster doesn’t Radiotext transmit any clock information then the display...
  • Page 9: Setting The Alarm

    Setting the alarm Alarm type You can either set the alarm to activate the radio The radio can be used as a standard “radio alarm or to produce a continuous beeping sound. To clock”. You can either set the alarm in standby or change the alarm type press and release the in power on mode.
  • Page 10: Sleep Mode

    Unplug the power lead from the rear of the radio, then reconnect it. Once you see the “Welcome Sleep Timer Set Intempo Digital” logo press and hold the 30 min “Select” key. When you see "System reset” then release the “Select key”.
  • Page 11: Troubleshooting

    Some Channels are being used for sending as NTL data, don't play any music. data. Maybe in the future some of them will start to offer services that you will be able to receive on your PG-01, such as stock market prices, news or even music.
  • Page 12 Glossary Stands for Digital Audio Broadcasting. Analogue radio is transmitted by placing the audio onto a carrier. If there is any interference or static with the wanted signal then it will be heard on the receiver’s speaker. Digital however is transmitted in the form of a digital stream.

Table of Contents