NUAGE MASTER CONTROL SURFACE Ncs 500 - CT CONTROL SURFACE NUAGE FADER Ncs 500 - FD V1.1 Supplementary Manual This supplementary manual explains features and functions that have been added or changed in TOOLS for NUAGE V1.1.0. Please read it together with the Nuage Fader Operation Manual and the Nuage Master Operation Manual.
Added the ADR mode ADR Page (Nuage Master) Added the ADR mode corresponding to the ADR function of Nuendo 6. TRANSPORT Section Press [Display access] repeatedly to display an “ADR page” (shown on the right), and then touch “Transport Switch” in the [Multi function Display] to select the ADR mode.
Added the functions for NUMERIC PAD Section configuring the buttons in the USER ASSIGNABLE section (Nuage Master, Nuage Fader) The function assignments can be saved, and the saved assignments can be recalled. The functions can be assigned to each Nuage Fader. USER ASSIGNABLE Page (Nuage Master) [MARKER]...
Page 4
Added support for remote NUAGE MASTER Setup To open this window, click the Nuendo menu “Devices” operation of the AD8HR “NUAGE MASTER Setup.” remote preamp (Nuage Fader) Overview The gains of the AD8HR connected to the Nuage I/O can be controlled.
Setting up the Nuage I/O Operation Function Open the “Nuage I/O Properties” from the NUAGE HA +48V Turns +48 V phantom power on and off. To Workgroup Manager, and then set the “ID” number of the turn on phantom power, hold down the AD8HR.
Added the display in the Added display channels on [Channel name display] the LCD (Nuage Fader) (Nuage Fader) The previous view can be called up after using the Agent function ([SEL CH], etc.), and you can scroll through and The whole name of the channel strip can be scrolled and display the selected channels when the desired channel displayed, and the display format can be changed.
Added some track select [ ] / [ ] (left/right) If you use the following functions when the channels operations (Nuage Master) displayed are fewer than the number of faders of the Nuage Fader (e.g., when you are using the Agent Tracks can be selected by the NUMERIC PAD, and function, etc.), you can operate adjacent channels.
Added some Zoom In and When the Select Track pop-up window is shown, the [input keys] have the following functions. Zoom Out operations [Input keys] Function (Nuage Master) [0] – [9] Inputs the track number to the input position. Some Zoom-related operations were added. [BACK SPACE] Deletes the number at the input position.
Added some editing Numeric Pad Input Selects the input format when you set the Project Cursor operations (Nuage Master) position in the Locate function. If you set this to “Right,” you can input the Project Cursor position as a text. The waveform offset can be changed, and the cut/copied event(s) can be pasted maintaining the position relative to the Project Cursor.