(Nuage Master) - Yamaha NUAGE MASTER Ncs500-CT Supplementary Manual
Control surface
Hide thumbs
Also See for NUAGE MASTER Ncs500-CT:
- Supplementary manual (10 pages) ,
- Supplementary manual (8 pages) ,
- Operation manual (108 pages)
Advertisement
Added some editing
operations (Nuage Master)
The waveform offset can be changed, and the cut/copied
event(s) can be pasted maintaining the position relative to
the Project Cursor.
EDIT Section
1
2
[MOVE]
1
When the Object Selection Tool is selected, if you turn the
[JOG WHEEL] while holding down [SHIFT] and [ALT], the
waveform offset of the selected track can be changed.
[PASTE]
2
When the Object Selection Tool is selected, if you press
[PASTE] while holding down [SHIFT], the cut/copied
event(s) can be pasted maintaining the position relative to
the Project Cursor.
Added other various functions
(Nuage Master)
SETUP Page
1
2
Disp Mode
1
Selects the display format of a [Channel name display].
Numeric Pad Input
2
Selects the input format when you set the Project Cursor
position in the Locate function. If you set this to “Right,”
you can input the Project Cursor position as a text.
DYN Page
1
2
Title Bar
1
Turns the “Bypass” switch that you touch on (lit) and off.
Parameters
2
Displays each processor's parameters. The parameters
that you touched can be controlled with the [Multi function
knob].
If you press the rightmost [Multi function knob] when
“Comp” is selected, the related parameters are displayed
in graph form. To return to the previous view, press the
[Multi function knob] again.
TRANSPORT Page
MAIN Page
1
Lock/Unlock
1
Lock (lit) or unlock “CLICK” and “TEMPO.”
If you lock these parameters, they cannot be controlled.
Page 9
Advertisement
