Related Manuals for Ergotron HD45
Summary of Contents for Ergotron HD45
-
Page 1: Installation Manual
INSTALLATION MANUAL HD45 Flat Panel Ergotron USA 1-800-383-1916 Ergotron Europe +31 20 312.29.39 Monitor Arm M4 x 10 mm M4 x 10 mm #6-32 x 3/8" 1/2" (13mm) Rev D. 02/03 1 of 6 888-45-004-00... - Page 2 Ergotron USA 1-800-383-1916 Ergotron Europe +31 20 312.29.39 (for Flat Panel Monitors and Keyboards) Overview When mounted properly, Ergotron ARMS™ will provide ergonomic monitor viewing and keyboard operation for a wide range of users - whether sitting, standing or in sit/stand situations.
- Page 3 Indien uw monitor voorzien is van een ander type schroef dan de M4 X 10 mm, gebruik dan beslist niet de door Ergotron geleverde M4 X 10mm schroeven of schroefknoppen, want deze kunnen de monitor beschadigen.
-
Page 4: Monitor Tilt
OVERVIEW Adjustment Ergotron's HD Series Arm is factory-set to provide positive pivot control and Justering a smooth moving force throughout the entire range of motion. To customize Justierung your installation, you will evaluate the operation of each function by moving Ajustement the Arm and Monitor through their full range of movement. - Page 5 Test Arm Tilt (up and down movement). Adjust as necessary. 0° 0° CAUTION: Arm must be held in the horizontal position during adjustment. Adjust at the top nut only. DO NOT turn the nut beyond the fi rst sign of increased resistance. The bottom nut will turn during adjustment of the top nut;...
-
Page 6: Troubleshooting
Ergotron Europe +31 20 312.29.39 Patents Pending and Patented U.S. & Foreign. Ergotron is a registered trademark of Ergotron, Inc. Reproduction of this material in whole or part for any purpose other than 1181 Trapp Road • St. Paul, MN 55121 that authorized by Ergotron, Inc.
Need help?
Do you have a question about the HD45 and is the answer not in the manual?
Questions and answers