FfitTech Elliptical Silver Owner's Manual page 10

『PRESS ENTER』alternatively. Press + or – key to adjust time, the range of time is 1-99
Min.
Press Quick Start Key, all values starts counting up. That means 【 【 【 【 PROGRAM
OPERATION】 】 】 】 starts.
The intensity level of the preset profile is set to be Level 1. When time is progressed by
counting up, the profile will shift to next column every one minute. When time is progressed
by counting down, the profile will shift to next column every one sixteenth of the set time.
LED screen is computerized to display TIME、DIST、RPM、CAL.
1. Press Display Shift to see the data of LEVEL、WATT、METS、PULSE.
2. Press + or – Key to adjust Level. If the screen displays Time item currently, the screen
will shift to Level item after pressing + or – Key. The Level item will return to Time
item if there is no key pressed during 3 seconds.
3. The screen will display heart pulse compulsorily if the console receives heart pulse
signal. The screen will not display calorie even if press Display Shift Key.
4. If time is progressed by counting down, the console will enter 【 【 【 【 Stop Mode】 】 】 】 when time
counts down to zero. Dot matrix will display the workout profile.
Program Mode： ： ： ：
Select Random、Weight Loss、CV Workout、Hill Intervals by pressing the corresponding
Key or select Random、Weight Loss、CV Workout、Hill Intervals Program by pressing +
/ – key，Dot matrix displays『PROFILE』 and the indicator of the corresponding profile
turns on, the screen will display『SELECT WORKOUT』and『PRESS ENTER』
alternatively, then【 【 【 【 Setting Mode】 】 】 】 starts.
Press ENTER for resetting or press START to begin. If no preset value, time will count up.
LEVEL is set to LEVEL1 by default.
Press ENTER to adjust the original LEVEL, the screen will display 『SET LEVEL 1』 and
『PRESS ENTER』alternatively. Adjust LEVEL by pressing + or – key, the range is 1-16.
Press ENTER to adjust time, the screen will display『SET TIME 30:00』and『PRESS
ENTER』 alternatively. Adjust time by pressing + or – key, the range is 1~99 Min.
Press Quick Start Key, all values begin to accumulate, then【 【 【 【 Operation Mode】 】 】 】 starts.
The console will perform according to the preset profile. When time is progressed by
counting up, the profile will shift to next column every one minute. When time is
progressed by counting down, the profile will shift to next column every one sixteenth of
the set time.
LED is set to display TIME、DIST、RPM、CAL.
1. Press Display Shift to see the data of LEVEL、WATT、METS、PULSE.
2. Press + or – Key to adjust Level. If the screen displays Time item currently, the screen
INTERNATIONAL SALES Phone: +351 967960956 Fax: +351 232412003
Urbanização Valrio Lote 1, Vildemoinhos, 3510-431 Viseu, Portugal
ELLIPTICAL SILVER – OWNER'S MANUAL
11
www.ffittech.com
Email: geral@ffittech.com