Supervisor Codes - Comb Communications MKII Quick Reference Manual

 The maximum GSM cable length should not exceed 10m, and should be
kept as short as possible. Longer runs will require the use of higher gain
antennae
 The GSM antenna can be extended from its standard length with a Comb-
approved RF cable extensions. This will ensure proper RF impedance
matching and signal quality. Do not extend the GSM antenna by joining
cables with soldered
 High Gain GSM antenna may be used to boost the signal strength.
 The antenna must not be installed inside any metal box or mesh cage as
this will degrade the RF performance.
 Always try to re-orientate or elevate the antenna if the signal strength is low.
 Try reduce physical access to the antenna for the purposes of reducing
vandalism attempts. Mount the antenna inside the secured premises

SUPERVISOR CODES

Supervisor codes are available on the B1000 and G2 models.
Code
*#0000
*#0001
*#0002
*#0003
*#0004
*#0005
*#0006
*#0007
*#0008
*#0009
*#0010
*#0011
Description
Display all supervisor codes
Firmware version
GSM signal strength
Synchronise the Unit.
Keypad reboot.
Battery voltage.
Configuration method.
Modem initialization
PCB Serial number
Manual configuration if enabled
ICCID number
Modem IMEI number