Before You Get Started; Installation Instructions; Mounting The Unit - DesignTech Smart Alarm 20620 Installation Manual

Before You Get Started

Contents:
1 Smart Alarm siren module
®
1 3-Button transmitter (comes with long-life lithium batteries)
2 Blue Scotch-Lock wire connectors
4 Cable ties (4" long) for wires
1 Spare blue 15 amp fuse
2 Screws & lockwashers for mounting bracket
2 "Warning: Protected by DesignTech" window decals
Wire Functions:
RED
BLACK
YELLOW
GREEN
BLACK W/ CLEAR END Coaxial Antenna Wire
Tools Needed:
•
Drill
•
1/8" Drill Bit (for drilling holes for bracket)
•
Pliers
•
Phillips Head Screwdriver
•
Small Adjustable (crescent) Wrench
Page 4
+12 Volts ("+" positive)
Ground ("-" negative)
Headlights Control
Electric Fan Sense (not always required)
20620

Installation Instructions

Never install this product with the engine running and be certain
to keep the alarm's wires away from moving parts.
Step 1
Mount the
Warning: When working around the car battery, never allow any metal
tools to short across the two battery terminals or from +12 Volts to ground!
20620

Mounting the Unit

Page 5