Summary of Contents for DesignTech First defence 20630
Page 1
V 4.1 Auto Securit y System Installation Manual Model #s 20630, 20930 For Use On Vehicles With 12 Volt (Negative Ground) Electrical Systems 20630 / 20930 Page 1...
Page 2
Transmitter Instructions for First Defense Alarm ® Your First Defense Transmitter ® operates as follows: Congratulations on your purchase of our First Defense ® , the first The light on the transmitter will turn Green when button car alarm designed to protect both You and Your Car. #1 is pressed, Red with button #2 and Yellow with button #3 when it is transmitting.
Spare blue 15 amp fuse from +12 Volts to ground! Screws & lock washers for mounting bracket Step 1 - Mounting the Alarm and "Warning: Protected by DesignTech" window decals Antenna Clip Connecting the Ground Wire Functions: Mount the Siren under the hood as near to the front of the vehicle as +12 Volts ("+"...
Page 4
How To Use The Scotch-Lock Step 2 - Red +12 Volt Wire Connector Connect the RED wire with its in-line fuse holder and 15 amp fuse to The diagram below shows how to use the blue Scotch-Lock the +12 volt ("+") side of the battery terminal, using our eyelet wire connectors to tap into the desired wires.
Page 5
Step 5 - Violet Starter Kill Wire Step 6 - Coaxial Antenna Wire Route the black Antenna Wire to the front of the grille of the car. The The VIOLET wire is a transistor ground output that is active whenever thick triangular section of the wire is the actual antenna and must be the system has been armed by the transmitter.
Page 6
Step 9 - Adjusting Shock Sensitivity Step 10 - Choosing A Siren Tone You can program the shock sensitivity level of your First Defense You can personalize your alarm's sound by selecting one of eight ® maximize sensitivity while reducing false alarms. different siren sounds.
Page 7
Step 11 - Trying Out the Alarm Step 12 - Using with a Wireless Sensor First Defense is capable of working with Wireless Alarm Sensor, ® Now everything is complete and it is time to try out the system. models 20615 or 20915 (not included). The Wireless Alarm Sensor is a small device that will monitor a door like those on the back of pickup trucks, truck caps, Tonneau covers or those on a tool box.
If The Headlights Don't Work: Using a Voltmeter or test light, make opener. Please call your local DesignTech sales outlet or call DesignTech at sure the Yellow wire is Scotch-Locked to the low-beam headlight 1-800-337-4468 for more information.
Page 9
OUT OF WARRANTY REPAIRS DesignTech International, Inc. will at its option either (1) replace this product with a function- ally similar (but not necessarily visually identical) refurbished product or (2) repair the original product and return it to the original consumer/purchaser C.O.D. covering all reason- able repair or replacement charges if the product is returned prepaid to DesignTech Interna- tional, Inc., 7955 Cameron Brown Court, Springfield, VIRGINIA 22153, USA, after the two...