Smart Alarm - DesignTech Smart Alarm 20620 Installation Manual

Remote car alarm
Table of Contents

Advertisement

Instructions for

Smart Alarm

Congratulations on your purchase of our Smart Alarm
alarm designed to protect both You and Your Car.
Smart Alarm
Protects Your Car:
®
The shock sensor built into the Smart Alarm
flashes your car's headlights if your vehicle is struck or jolted.
Current sensor sounds siren and flashes headlights if someone tries to
start your car while the car alarm is armed or if a light is triggered by
opening the doors, trunk or hood.
Smart Alarm
Protects You:
®
Sounds a panic alarm, which you activate from up to 400 feet away, to
call for help or scare away troublemakers.
The Carfinder
feature helps you locate your vehicle quickly in a large
®
parking lot by flashing the lights and chirping the siren to tell you its
location.
Turns on your headlights by remote control for 30 seconds to light
your way to or from your vehicle.
Stops carjacking by creating a delayed panic alarm 1 minute after the
vehicle is taken. The alarm will sound and flash your car's lights for 50
seconds after your car has been turned off.
Page 2
®
, the first car
®
sounds the siren and
®
20620
Transmitter
Your Smart Alarm
Transmitter
®
Operates As Follows:
The light on the transmitter will turn Green when button
#1 is pressed, Red with button #2 and Yellow with button
#3 when it is transmitting.
Press once for 1 second:
Arm alarm / Siren chirps
once or
Lights flash once (Lights will flash if siren is
silent)
Press again for 1 second:
Disarm alarm / Siren chirps twice or
Lights flash twice (Lights will flash if siren is
silent)
Note: if alarm has been triggered, you will hear
4 chirps during disarm)
Button Two:
Press for 1 second:
Carfinder
lights come on for 2 seconds)
Hold down for 3-4 seconds: If vehicle is not running: Panic Alarm (flashing
lights and siren)
If vehicle is running:
carjacking (alarm activates 1 minute later and
stays on until 55 seconds after the ignition is
finally turned off)
Button Three:
Press once (1 second):
Turn headlights on for 30 seconds
If you press Button Three just before pressing Button One, then the alarm
will operate silently (i.e. with no siren chirp). Instead, your car lights will
flash once to confirm arming and twice to confirm disarming.
The Smart Alarm
is fully user programmable from the remote transmitter
®
for choosing shock sensitivity and your choice of 8 different siren sounds.
20620
(siren sounds for 2 seconds and
®
Anti-
Page 3

Advertisement

Table of Contents
loading

Table of Contents